JP79016
LED SPOT User Guide
Operating Instructions
1. External trigger function - "AUTO change" mode
- When all of the dip switches are turned off, the slide switch is set to "AUTO" then the unit will change its colour automatically, then you can adjust its changing speed through the SPEED knob.
2. External trigger function - Sound control mode
- When all of the dip switches are turned off and the sliding switch is set to "SOUND", then the unit will change its colour under the SOUND 's changing.
3. Auto-MIX Colour Mode
- When dip8 is "on" the unit will step into Auto-mix colour mode. The mixing speed is controlled via setting the dip1-7 to "on".
5. DMX mode
- When the sliding switch is set to "SOUND", dip 8 is "off", one or a few of the other dip switch(es) is (are) on, the unit will step into DMX mode. The switch 1-7 control DMX address
The unit has 5 control channels
| CH-1 | Red 0-100% | ||||||||
| CH-2 | Green 0-100% | ||||||||
| CH-3 | Blue 0-100% | ||||||||
| CH-4 | Colour Macro | ||||||||
| CH-5 | DMX Value | 0-15 | 16-255 | ||||||
| Function | Null | *Strobe Mode | |||||||
| *CH-6 | DMX Value | 0-31 | 32-63 | 64-95 | 96-127 | 128-159 | 160-191 | 192-223 | 224-255 |
| Function | Null | Brightness up cycle | Brightness down cycle | Brightness up & down | Mix colours | 3 colour change | 7 colour change | Sound | |
*Strobe mode: This is a strobing speed control mode. You can choose the strobing colours and adjust the strobing brightness via CH-1, CH-2, CH-3 or CH-4, and you can choose CH-1, CH-2 and CH-3 at the same time or separately, but CH-4 is beyond CH-1, CH-2 and Ch-3.
*CH-6: In this channel, you can get 7 colour changing models via changing the DMX value, but the colour changing speed is controlled via CH-5 (CH-6 is beyond CH-5); when the channel value of CH-6 is between 32 and 127, you must also choose CH-1, CH-2 or CH-3 by making their channel value above 8, then the brightness of the unit will change under 3 modes: 1, up cycle, 2, down cycle, 3, up then down cycle. When the channel value of CH-6 is between 224 and 255, you must also make sure the sliding switch is into "SOUND", then the unit will step into SOUND mode of DMX.
Warning! - To reduce the risk of fire or injury:
1. Never operate this device:
- If it has a damaged cord or plug
- If it is not working properly
- If it has been dropped or damaged, or immersed into water.
- Return the product to the dealer for examination and repair
2. Keep the cord away from heated surfaces
3. Never block the air opening of the device
4. Never place it near fabrics or combustible materials
5. Never drop or insert any object into opening
6. Always unplug this product immediately after using
Connection with the mains
DANGER TO LIFE! The electric connection must only be carried out by a qualified electrician. In order to connect the device to the mains, you have to install a power-plug. The occupation of the connection cables is as follows:
- Cable Pin International
- Brown Live L
- Blue Neutral N
- Yellow/Green Earth E
TECHNICAL SPECIFICATIONS
- Power supply: Max 230-240V/AC, 50Hz
- Power Consumption: Max 32W