Allen & Heath Xone 02 stereo pro turntablist DJ mixer, From inputs to outputs, we created Xone:02 to be the world’s greatest battle / scratch mixer. Every fader is a deluxe VCA design, they’re all reversible, they all have contour controls and they can all be easily replaced by removing the steel faceplate. We’ve kept the fader area clear for action and we’ve kept controls like pan and EQ out of the way on low profile sliders. Even the transform switches can be rotated to work the way you like them. Don’t go into battle with anything less.

Features:

• 2 Dual Stereo Channels: Channels have RIAA [RCA] inputs, switchable to line, plus stereo line level inputs [RCA], each with gain control. Powerful 3 band ‘music’ EQ on sliders. High quality 45mm faders. Input reverse switch for battle mixing. Pre fade monitoring on 12 segment 3 colour peak reading bar meters.
• Mic Channel: 2 XLR inputs with separate gain controls, on switch and 3 band EQ with HPF. Routes direct to mix outputs. FX insert on button.
• Stereo Mix Outputs: Balanced mix outputs on XLR with multi-point VCA level master control. The mix output level can be displayed on the 12 segment 3 colour peak reading bar meters.
• Booth Output: RCA outputs with level control for booth / link out to additional ‘daisy-chain’ mixers.
  FX Loop: Channels have an effect loop on switch with silent FET switching. Effect insert points are separate [TRS] inputs and outputs.
• 3 Band EQ: Powerful 3 band 12dB/oct EQ with ëasymmetricí characteristic: +6dB boost emphasis and -26dB cut for frequency band elimination.
• VCA Faders: High quality dual-rail, gold-contact, conductive plastic 45mm faders with contour control, reverse switch and led. Crossfaders can be upgraded to ultra-high quality Penny & Giles conductive plastic faders, and can be substituted in minutes by removing the faceplate.
  Transform Switches: Performance channel mute controls which can be rotated to work up/down or left / right.
• Engineer / DJ’s Toolbox: High powered headphone output with level and mute switch. Booth / link output on TRS with level. 12 segment 3 colour bar metering displays CH1&2 or mix. Channels have 12 segment 3 colour bar meters. CH1 / CH2 cue fader allows preview of x-fades.
• PSU: High performance internal switched-mode power supply. Universal mains input voltage.
• Options: Conductive plastic Penny & Giles x-fader.
• Mechanical Specs: 258mm / 10.2 Width, 360mm / 14.2 Depth, 4.5kg / 9.9lb Weight.

Technical Specifications:

• OdBu = 0.775 Volts rms +4dBu = 1.23V rms
• OdBu = 1 Volt rms -10dBV = 316mV rms
• Maximum output level: MAIN OUT +23dBu into >2K ohm load, EFFECT SEND +21dBu into >2K ohm, LINK/BOOTH +21dBu into >2K ohm.
• Internal headroom: Channels +21dBu, Mix to output +23dBu
• Peak indicators meters: 12bar peak reading Peak on 8dB before clipping
• Frequency response: 20Hz-30kHz 0/-1dB
• Distortion: THD+noise measured at +10dBu 1kHz 0.04%
• Crosstalk: channel shutoff measured at 1kHz <90dB
• MIC EI: Measured with 150ohm load 129dB
• Residual output noise: non weighted 22Hz-22kHz filter <88dBu
• Mix noise: non weighted 22Hz-22kHz filter <-81dBu
• Power Supply: Internal switch mode power unit with auto sensing mains input.
  Mains In socket IEC 3 pin, AC Mains 100-240V AC 50/60Hz, Power lead Country dependent, Consumption 30W max, Fuse Rating T500mA 20mm, Internal power rails +/- 16volts.
• Size: 258mm / 10.2 Width, 360mm / 14.2 Depth, 4.5kg / 9.9lb Weight.

Optional Accessories: Penny and Giles conductive plastic crossfader, available as an upgrade to the standard Xone:02 crossfader

Xone:02: Associated Downloads: