Allen & Heath Xone 32 professional DJ mixer, Is it us, or do most DJ mixers look like they’ve been designed by middle-aged failed guitarists who think all DJs are naughty 12 year-olds?? We’re a bit different. All the Xones are created by a design engineer with 20 years’ DJing experience under his belt, so they’re serious consoles for creative adults. The Xone:32 lets the DJ push the boundaries of performance, with VCF filters, a tap-programmable low-frequency oscillator and DRS memories giving unprecedented control over the music (and the crowd).

• 3 Dual Stereo Channels: Channels have RIAA [RCA] inputs and [TRS] stereo line level inputs, with powerful 3 band EQ. All channels have 3 colour bar meter and gain control, EQ on switch and 60mm fader
• Mic Channel: XLR input with gain control and 2 band EQ, including HPF. Located on front. Routes direct to mix outputs.
• Stereo Mix Outputs: Balanced mix outputs on TRS with level control, plus secondary RCA pre-fade outputs for recording. The mix signal is displayed on 12 segment 3 colour peak reading bar meters.
• 3 Band EQ: Powerful 3 band EQ with ‘asymmetric’ characteristic; +6dB boost to preserve headroom and -26dB cut for creative mixing.
  Auxiliary Send: All channels have a post fade stereo auxiliary send, so a program feed to a zone is possible. The outputs are [TRS] jacks.
  VCA Cross Fader: High quality dual-rail gold-contact 45mm fader with contour control, reverse switch and led, plus bypass switch with led. CH1 is routed to X, CH3 is routed to Y, CH2 does not route through the x-fader.
• Transmute Buttons: A unique function which combines ‘transform’ and ‘punch’ DJ effects for intelligent and creative live performance. Works in conjunction with x-fader using X & Y buttons.
• VCF Filters with DRS Presets: Choice of High Pass, Band Pass, Low Pass or multiples e.g. notch. Resonance - adjusts Q from ‘mild to wild’. VCF slider controls filter from 100Hz to 20kHz. Channels have individual VCF on buttons with blue led. VCF can also be modulated by a low frequency oscillator with performance controls. DRSTM presets allow store and recall of 4 VCF performance settings including Channel on, VCF type, LFO on and LFO X2
• LFO with Tap Tempo: Low Frequency Oscillator. Modulates VCF. Tap Tempo button allows the speed of the LFO to be set to the track. X2 switch doubles the speed. On switch activates the LFO and allows VCF slider to control depth
• Engineer / DJ’s Toolbox: High powered headphone output with level. Booth output on [TRS] with level. 12 segment 3 colour bar metering displays mix. Channels have 4 segment 3 colour bar meter. Channel cue / main mix fader adjusts headphone monitor to suit. Cue switches are interlocked / auto cancel.
• PSU: High performance internal switched-mode power supply. Universal mains input voltage.

• OdBu = 0.775 Volts rms +4dBu = 1.23V rms
• OdBu = 1 Volt rms -10dBV = 316mV rms
• Maximum output level: MAIN OUT +24dBu into >2k ohm load, AUX/BOOTH +20dBu into >2k ohm load, REC OUT +15dBu into >10K ohm load.
• Internal headroom: Channels +21dB, Mix to output +23dB
• Peak indicators: Turn on 12dB before clipping.
• Meters: MAIN / MONITOR Peak hold 12 LED 3 colour, CHANNEL Peak reading 4 LED 3 colour.
• Frequency response: 10Hz to 30kHz +0/-1dB
• Distortion: THD+noise measured at +10dBu 1kHz < 0.02%
• Crosstalk: channel shutoff measured at 1kHz < 90dB
• Noise: measured rms 22Hz to 22kHz, MIC EIN -126dB referred to 150 ohm source
• Residual output noise: -100dBu
• Mix noise: -87dBu (-87dB S/N)
• Power Supply: Internal switch mode power unit with auto sensing mains input. MAINS IN socket IEC 3 pin, Power lead Country dependent with moulded mains plug supplied, AC mains 100 to 240V AC @ 50/60Hz, Consumption 30W max, Mains fuse rating 100-240V AC T500mA 20mm
• Size: 258mm / 10.2" Width, 360mm / 14.2" Height, 90mm / 3.5" Depth, 4.5kg / 9.9lb Weight.

Optional Accessories:

• Penny and Giles conductive plastic crossfader, available as an upgrade to the standard Xone:32 crossfader
• Ears for mounting Xone:32 in a plinth

Xone:32: Associated Downloads:

Applications guide ...252KB.pdf
Hookup diagram and explanation showing typical DJ setup

Block diagram ...211KB.pdf

Applications guide - DRS digital recall system ...266KB.pdf
Guide to using Xone:32's on-board memories to store an recall filter settings

Front panel diagram / control layout ...480KB.pdf
Zoomable line drawing of control surface

Quick start guide ...73KB.pdf
Fast introduction to the mixer - ideal for guest users

Applications guide - transmute / VCF filters ...180KB.pdf
Guide to using Xone:32's transmute buttons and analog Voltage Control Filters

User guide ...1.74MB.pdf
Full 25 page guide

Xone glossary ...81KB.pdf
Technical terms from Amplitude to XLR explained