Flex Fader –45mm Professional Cross Fader with Tension Torque Adjustment
- Linear Contour Control
- Exceptional electrical and mechanical performance
- Stainless steel slide rails
- Tension torque adjustment 0 to 50g · cm
- Endurance-tested contacts
Sampler (CD Quality Sound)
The sampler utilizes audio from any of six mixer sources (Ch 1/2/3/4, Mic, Master) and offers edit options including Loop, Reverse Loop, Stutter, Single Playback and A-B Trim with overall Pitch Control adjustment of up to ±100%.
Internal Digital Effects
Delay, Echo1, Echo2, Filter 1, Filter 2, Flanger, Auto Pan, Trans, and Key % over Ch1/Ch2/Ch3/Ch4/Main Mic/Master – all with pre-cueing option and convenient Dry/Wet mix control knob.3-Way BPM Counter - Auto/TAP/Manual Input – This 3 way system was developed to ensure that the on-board effects are precisely synced with the music.
Cross Fader Start and Channel Fader Start
Cross and Channel Fader Start Trigger is possible and compatible with all of Denon DJ\'s CD/MP3 players as well as most other brands.Constant Digital Output: 44.1 kHz, SPDIF
The DN-X1500S allows you to record directly to CD-R or hard disc device via coaxial digital output terminal.
Stereo Send/Return Terminals for external effects processor. External and internal effects can be used simultaneously.3-band EQ (On/Off Switchable) with parametric frequency adjustment.
Main Mic and Aux Mic Inputs (Neutrix combo and 1/4\") with Main and Aux/Sub level control and EQ.Pre Fader Levels (PFL) for Each Channel
All input channel levels can be pre-adjusted to match output level meter ensuring a smooth transition between fades.
OTHER FEATURESMic Post Feature
Passes the Mic signal into BOOTH, REC or DIGITAL output signal path. A great feature to avoid feedback in the DJ booth or unwanted announcements on your recordings.
Preset Function
It is possible to customize the machine to your preference by saving your favorite setting to internal memory.Headphone Output selector (Split Cue)
Booth Output
You are able to pre-monitor any channel and effect through the booth output in the same manner as you would with your headphones, only out loud!
