NJD IQ MX80 PROGRAMMABLE DMX CONTROLLER. The IQ-MX80 is now even more versatile than ever. With its new software this superb touch sensitive controller enables up to 16 NJD DMX products to be addressed individually (any number of NJD DMX products on each channel). Features include a Joy-Stick for manual or programming operation, 10 pre-set programs, 10 user-programmable programs, 250 steps per program, real time, or step by step user-programming and battery backup (which retains the programs when the power is disconnected). In addition to all of these facilities the IQ-MX80 features Program and Step indication a Sound input and a Step Speed control. 

The new software also allows the controller to access all of the facilities available in the new PREDATOR range of scanners including split colours and colour scrolling and will also enable the IQ-MX80 to control the new CHROMA HX colour changer including split colours, scrolling, strobe effect & blackout. Joystick Y axis controls the CHROMA HX's dimming. In addition to expanding the range of NJD products that the IQ-MX80 can control the standard software has also been enhanced to allow Manual Override whilst running programmes and it will now return to the previous operating mode when power is turned on. (New software upgrade chip available for earlier models) By utilising DMX512 and serial data technology connection to the lighting effects is simplicity itself. One two-core screened cable is all that is required to carry all of the control information from product to product. 

Specification

• Audio input sensitivity : 775mV (0dBm) to 60V
• Audio input impedance : 15k Ohms
• Audio input connector : 6.35mm Mono Jack
• Output connectors : 5 pin XLR
• Output : DMX512 : 1990
• User programming period : 10 x 25 seconds or 1 x 4 minutes 10 seconds
• Power requirements : 230V AC 50/60Hz 6VA 
• Dimensions : 483mm x 133mm (3U) x 135mm
• Minimum mounting depth : 100mm
• Weight : 1.5kg (Including power supply