NJD IQ MX 60 PROGRAMMABLE DMX CONTROLLER.The IQ-MX60 allows any number of MICROBEAM 100s, SB500 Super Blitzers & DATAMOONs to be synchronised into four channel patterns. This compact new controller enables the individual selection of static position, any of the 12 pre-programmed or 2 user programmed patterns, a Run facility which will sequence through all of the patterns, a gobo and colour selection switch, including colour sequence, a colour/gobo Run facility plus black out and strobe selection. Features include a joy stick for manual or programming of the two real time user programs and automatic backup (which retains the programs in the event of mains failure). 

In addition to all these facilities the IQ-MX60 features lantern select switches, which allocate the lanterns to the joy-stick, for both manual override and programming, a Sound input and a Step Speed control. By utilising DMX512 and serial data technology connection to the luminaires is simplicity itself. A two core screened cable is all that is required to carry all of the control information from the controller to the first luminaire, each luminaire then daisy chains to the next. ( Also compatible with PREDATOR MX & PREDATOR HX although not all of the PREDATOR's facilities will be available) 

Specification

• Audio input sensitivity : 775mV (0dBm) to 60V
• Audio input impedance : 15k Ohms
• Audio input connector : 6.35mm Mono Jack
• Output connectors 5 pin XLR
• Output : DMX512 : 1990
• User programming period : 2 x 25 seconds
• Power requirements : 230V AC 50/60Hz 6VA
• Dimensions : 483mm x 44mm (1U) x 50mm
• Minimum mounting depth : 100mm
• Weight : 1.25kg