NJD IQ MX40 SYNCHRONISING DMX CONTROLLER. The IQ-MX40 allows up to forty MICROBEAM 100s, SB500s Super Blitzers & DATAMOONs to be synchronised together. This clever four channel controller allows the individual selection of static display or 14 pre-programmed patterns, a RUN facility, which will sequence through all 15 selections, a gobo and colour selection switch, including colour sequence and colour/gobo Run facility plus Lamp off and Strobe selection (Where the lighting effect has these features).

In addition to all of these facilities the IQ-MX40 features a Sound input and a Step Speed control. By utilising DMX512 and serial data technology connection to the luminaires is simplicity itself. One two-core screened cable is all that is required to carry all of the control information from the controller to the first lantern and from one lantern to the next. Also compatible with PREDATOR MX & PREDATOR HX although not all of the PREDATOR's facilities will be available)

Specification

• Audio input sensitivity : 775mV (0dBm) to 60V
• Audio input impedance : 15k
• Audio input connector : 6.35mm Mono Jack
• Output connectors : 5 pin XLR
• Output : DMX512 : 1990
• Maximum load : 40 x IQ250's (10 per channel)
• Power requirements : 230V AC 50/60Hz 6VA
• Dimensions : 483mm x 89mm (2U) x 78mm
• 78mm Minimum mounting depth : 100mm
• Weight : 1.8kg (Including power supply)