JBL SRX715 - 15 two-way, The JBL SRX715 offers the highest level of performance available from a portable, pole or tripod mountable speaker. The 2265H Differential Drive® woofer handles 800 watts (continuous) while weighing only 48 lbs (22kg). A 2431H 3" diaphram, neodymium compression driver on a 75° x 50° horn makes the SRX715 the best choice for general purpose sound reinforcement, live performance, music playback or speech. When the application calls for increased low-frequency extension, add the SRX728S or SRX718S subwoofer.

• System Type: 15", two-way, bass-reflex
• Frequency Range (-10 dB): 40 Hz - 20kHz
• Frequency Response (±3 dB): 53 Hz - 20 kHz
• Coverage Pattern: 75º x 50º nominal
• Power Rating (Continuous/Program/Peak): 800 W / 1600 W / 3200 W
• Dimensions (H x W x D): 711 mm x 439 mm x 406 mm (28 in. x 17.3 in x 16 in)
• Net Weight: 22 kg (48 lbs.)

High Power: Amplifier manufacturers are building amps that can produce more power at less cost than ever before. The SRX700 series lets you unleash that power with a new generation of very high power low-frequency drivers. That would be enough for most manufacturers, but JBL accomplished this while also greatly reducing the weight of the drivers.

Incredibly Lightweight: SRX700 uses JBL's parented Differential Drive® woofers with neodymium magnets. Neodymium's magnetic properties allow a few ounces to replace pounds of conventional magnet. 

Suspension: Flying versions of the SRX700 two and three-way models are also available as SRX700F models. These offer you the option of selecting economical, forged eyebolts for fixed installation or the convenience of detachable track fittings for portable applications. Just choose the hardware kit that's right for your application. For fixed installation, use the optional JBL 229-00009-01 which includes 3 x M10, forged eyebolts and washers. If you need a detachable rigging solution, select the optional SRX-FF3 flying fitting kit. This kit includes 3 fittings that attach to the track on the SRX700F models.

Full-Range Operation: All SRX700 2 and 3-way models may be operated full-range or bi-amplified. The selection is made by means of a high-current, recessed switch mounted on the input plate. The switch is accessible while also being protected from accidental mis-setting. The same switch arrangement is used on the subwoofer to select +/-1 or +/-2 operation.