NJD DP10000 DIMMING PACK Mk 2.
Supplied in a wall mounting box with all screw terminal connections the new DP10000 Mk 2 is one of the most popular 4 x 2.4kW dimming packs available. With 0-10V analogue inputs, the DP10000 Mk 2 is suitable for use on AC voltages from 12 to 230V and comes with the adjustable 'filament preheat' as standard. The DP10000 Mk 2 is now considered to be one of the most reliable dimming packs available.

Specification

• Input connectors : Terminal block
• Output connectors : Terminal block
• Input voltage : 0-10V DC Analogue 0V-off, +10V fully on
• Input impedance : 48k Ohms
• Enable : 0V disabled 10V enabled
• Enable connector : Terminal block
• Auxiliary outputs : 10V DC (regulated) @ 5mA, : 15V DC (unregulated) @ 100mA
• Controlled supply : 12V to 250V AC 40 Amps maximum
• Maximum output current : 10 Amps per channel = 240VA @ 24V AC = 1.2kVA @ 120V AC = 2.3kVA @ 230V AC
• Maximum total current : 40 Amps
• Interference : -40dBV at load terminals 150kHz-30MHz
• Complies with EN55014 : -60dBV at mains terminals
• Power requirements : 120/230V AC 50/60Hz 6VA (120V selectable)
• Dimensions : 304mm x 178mm x 63mm
• Weight : 2.5kg