Mood Tube Controller, used in conjunction with the 1000mm multicolour Moodtubes. Control signals and power for the LED Tube System come from the Moodtube Controller, connection is made by way of molded integral Male/Female sockets Mood Tube Controllers function in either 'stand-alone' mode, or as DMX mode. Each controller can drive up to 1000 linked Moodtubes per each of its 2 signal output channels, for a maximum total 1000 tubes per controller. Power to the tubes is supplied by the controller, for the initial 4 tubes of a linked run. To addition tubes you will require a Mood tube Booster for ever additional 8 Tubes added.

TECHNICAL SPECIFICATIONS:

• Mains Powered: 220/230VAC 50Hz.

• Outputs: Two paralleled DC lines capable of driving 4 tubes per output.

• Controller cable of controlling  2000 tubes (1000 tube per line), note that LED Tube booster is required for every 8 tubes added after the initial 4 per output.

• Temperature range: 0° C to 45° C.

• Humidity range: 0-95% non condensing

• Controller function in either 'stand-alone' mode, or as 4-Channel fixtures by any standard DMX 512 console