Jem K1 Hazer, The JEM K1 Hazer from Martin is a top of the range solution to a wide variety of atmospheric requirements whether permanently installed or taken on the road. The JEM K1 continuous output hazer features a revolutionary new block design and a high volume radial blower, which means the K1 can quickly produce large volumes of haze to create large scale effects in the biggest venues.

Features

• Designed for service ease
• Continuous output
• Output and density level control
• 5000 m³/min haze output
• Integrated high velocity fan (variable fan speed)
• 600 W heat exchanger
• 2.5 liter fluid capacity
• Low fluid consumption and longer hang-time for greater economy
• Water based - no oil residue on light fixtures
• Automated shut-down procedure to prevent clogging
• On-board DMX, 3 & 5 pin
• On-board control panel
• Fast access set-up mode
• Optional digital remote control
• Silent Mode
• Eco mode extends run time and improves fluid economy

Specifications

Physical

• Length: 544mm
• Width: 459mm
• Height: 344mm
• Dry weight: 21.5Kg

Performance

• Effect coverage: 5000m3/min
• Operating time: continuous
• Warm up time: 5 minutes
• Safety device: DTP device

Control and programming

• Control options: DMX, digital remote
• DMX channels: 2

Fluid system

• Capacity: 2.5 litre
• Fluid consumption (max): 140ml/hr
• Compatible fluids: K1 Haze

Connections

• DMX: 3 or 5 pin XLR
• Remote / machine link: 3 pin XLR
• AC power: PowerCon

Electrical

• AC voltage: 120V / 230V, 50/60Hz
• Main fuse (120V US version): 10AT
• Main fuse (230V EU version): 5AT
• Power usage (120V US version): 675W (6.0A)
• Power usage (230V EU version): 675W (3.1A)

Thermal

• Maximum ambient temperature (Ta max): 40°C (104°F)
• Exterior surface temperature, steady state, at 20°C ambient: 40°C (104°F)

Approvals

• European EMC:. EN 61000-6-3:2001 – Part 6-3
• European safety: EN 60 335-1:2002
• Immunity: EN 61000-6-1:2001 – Part6-1
• ETL approval (cETLus): UL Std.998, CAN/CSA Std. C22.2 No 104-0122 Specifications

Included items:

• EU Model: 2.5m (6.56ft) power cable 3x1.0mm² with PowerCoN™ male connector
• 1 x 2.5L fluid container (empty)