£55.13 (£64.78 Including VAT at 17.5%)

Nexo Alpha E AL.WL0.6 Touring Lid fo E-M Cabinet

£108.03 (£126.94 Including VAT at 17.5%)

Nexo Alpha E AL.VFR Rails & Fly Kit for E-M Cabinet

£3,174.06 (£3,729.52 Including VAT at 17.5%)

Nexo Alpha E-FC Full Range Cabinet, Carpeted version. Same dimensions as Alpha S2.
18" Long Excursion Driver, composite curve, folded horn; horn-loaded 10" mid and 3" voice coil HF driver with passive network.

The Alpha E-F is a full-range cabinet in a one-box dedicated format suitable for both installation and live touring use. A 3-way bi-amplified system with a passive HF/MF crossover, the E-F deliveres outstanding performance as a system in it's own right as well as being ideally suited as an addition to the Alpha System for near-fill or side-fill applications.

Nexo Alpha-E Series - From rock tours to nightclubs, theatres to live venues the powerful, lightweight Alpha-E system brings Alpha technology to an even wider audience.  The E Series is available in two different user formats; the full range E-F or the E-M & B1-18 combination. Applications requiring extended sub-bass performance can also utilise the Alpha S2 sub if required. System control is via the mandatory NX241 Digital TD Controller. As with all the Alpha family, E-Series cabinets may be ground-stacked or flown, and are fully compatible with the proprietary Crossbow flying system. Furthermore, they are all supplied with flying metalwork in place, requiring only rails to be added for that full-flown flavour.

System Specifications when used with NX242 controller:

• Frequency Response (a): 40Hz -  19KHz +/-3dB
• Usable Range @-6dB (a): 38Hz - 20KHz +/-6dB
• Sensitivity 1W @ 1m (b): 107dB SPL
• Peak SPL @ 1m (b): LF 142dB  MF/HF 104dB Peak
• Dispersion (c): 75° x 30 °
• Directivity Q & DI (c): Q = 25,  DI  = 14dB
• Crossover Frequencies: LF / MF  210Hz Active, MF / HF 2.2KHz Passive
• Nominal Impedance: LF 6 ohms (4.7 min), MF / HF 8 ohms (7.5 min)
• Recommended Amplifier:  LF 900 - 1400 watts into 6 ohms, MF 700 - 1000 watts into 8 ohms
• Dimensions (H x W x D): 1200mm x 689mm x 754mm
• Weight: 95 Kg

£1,474.47 (£1,732.50 Including VAT at 17.5%)

System Specifications when used with NX242 controller:

• Frequency Response (a): 40Hz -  230Hz +/-3dB
• Usable Range @-6dB (a): 38Hz - 600Hz +/-6dB
• Sensitivity 1W @ 1m (b): 107dB SPL
• Peak SPL @ 1m (b): 142dB Peak
• Nominal Impedance:  6 ohms (4.7 min)
• Recommended Amplifier:  900 - 1400 watts into 6 ohms
• Dimensions (H x W x D): 800mm x 689mm x 754mm
• Weight: 66 Kg

£1,469.63 (£1,726.82 Including VAT at 17.5%)

The Nexo NX242 Digital TD Controller provides all the functions of the conventional Nexo analogue TD controllers combined with all the advantages of the latest digital technology.

The Nexo NX242 is an uprated version of the now discontinued NX241. As with the 241, it provides crossover, sensed amplifier control and system alignment, along with peak limiter, displacement and temperature protection on every channel.
* 24-bit 2-in, 4-out
* Programmed for all current Nexo loudspeaker systems.
* 4 amplifier sense inputs
* Flash eprom
Firmware upgrades & new cabinet setups can be downloaded from the Fuzion or Nexo website and are uploaded to the NX via RS-232
* Up to 80 factory presets
* User configurable inter-channel gain, delay and array EQ

The NX242 is mandatory for use with Alpha / Alpha-E and all systems in the Geo range but can be used with all current Nexo loudspeaker systems instead of their proprietary analogue controllers.

The new NX242 also supports Ethersound Digital Audio too using the new optional modules.

£1,010.53 (£1,187.37 Including VAT at 17.5%)

NEXO ANXTENSION-ES4 NXtension-ES4 Expander board, Improves NX242 processing capacities and adds Digital Inputs/Outputs plus remote control functions via the DigiGram Ethersound network.
The Ethersound Interface provides 4 digital inputs and outputs (24bit/48KHz.)with digital audio distribution (64 channels) over Ethernet and ultimate low propagation delay allowing its use in the most demanding of live audio applications. In addition to this, the interface includes full network or local remote control management of channel adjsutment and remote control of all NX242 parameters.

Ethersound - Audio Distribution over standard Ethernet Digigram's Ethersound enhances established technologies with easy to implement, high quality audio networks. The patented EtherSound protocol provides full control with very low latency (125uS plus 1.6uS per additional network node) transmission of synchronised audio channels over standard Ethernet. EtherSound's cost effective, fully digital path between a virtually infinite number of networked audio devices offers up to 64 channels of 24bit digital audio at 48KHz.,plus bi-directional status and control data. Off the shelf Ethernet components such as 100baseTX switches can extend the number of audio devices as well as the distance between them.
Note: For NX242 ONLY. Also requires NXtension-CAI Expander board - included in the price.
NX control and monitoring software is available as a free download.