£592.98 (£711.58 Including VAT at 20%)

Nexo PS15 TDcontroller-R2, The PS15 TDController-R2is an advanced analogue processor that allows the PS15-R2 Loudspeaker and optional RS15 Subwoofer to achieve exceptional performance from such compact packages. The PS15 TDController-R2 provides crossover, sensed amplifier control and system equalisation optimised for the PS15-R2 and RS15.

The PS15 TDController-R2 also features user-selectable passive or active (bi-amp) operation of the PS15-R2 Loudspeaker. One PS15 TDController-R2 has two inputs and three outputs, including summed sub out, minimising installation cost and complexity.

Like all NEXO processors, the PS15 TDController-R2 provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalisers (VCEQs), reducing levels only at frequencies when and where necessary.

Features

• Precision circuits engineered for the PS15-R2/RS15 systems permit increased sound pressure and operational reliability.
• Servo controlled VCEQs provide precise dynamic control without spectral imbalance.
• Two inputs and three outputs enable a single PS15 TDController-R2 to manage multiple PS15-R2 and RS15 products.
• User configurable for passive or active (bi-amp) operation of the PS15-R2 Loudspeaker.
• Comprehensive indicators and controls.

PS15 TDController-R2 Product Features

• Audio Inputs Two L&R Audio inputs. Electronically balanced, 50KOhm. Two XLR-3F connectors.
• Sense Inputs
  • Three Amplifier Sense Inputs, 180 kOhm. 6 Pole Removable Strip Terminal.
  • Passive Mode, PS15-R2 L&R, RS15. Active Mode, PS15-2 LF and HF, RS15.
• Audio Outputs
  • Three audio outputs. Electronically balanced, 50 Ohm. Three XLR-3M connectors.
  • Passive Mode, two PS15-R2 L&R, one Mono (L+R) RS15. Active Mode, one PS15-R2 LF, one PS15-R2 HF, one Mono (L+R) RS15.
• Controls Front panel: Overlap/Crossover switch, Two Bass EQ trimmers (+/- 3 dB), Three Peak Limiter Adjust trimmers. Three Gain trimmers (+/- 6dB). Back panel: Gain switch (back panel), 3 positions for Amps with Gain : -6 / 0 / +6 dB. Internal: Active/Passive Mode switch. Three Protection trimmers.
• Indicators Speaker Protect LEDs. Amp Sense & Peak LEDs. Active Mode LED. Power ON LED.
• Dimensions 1U 19" Rack. 190mm (7.5") Depth.
• Weight 2.9kg (6.6 lbs) net.

System Specifications PS15 TDController-R2

• Input Level +28dBm max into 600 Ohms.
• Output Level +22dBm.
• Noise -88 dBm (22 Hz - 22 kHz, Unweighted).
• THD+N < 0.03% Typ. 0.05 Max for +18dBm Output.
• Power Supply 110/220 Volts (External Rear Panel Switch), 50/60Hz. Earth-Lift (back panel).

System Operation

• Applicable Products The PS15 TDController-R2 is precisely matched to the PS15-R2 & RS15 cabinets and includes sophisticated protection systems. Use of either product without a properly-connected Controller will result in poor sound quality and may damage the components.
• Sub-bass Active two-way operation of the PS15 Loudspeaker in passive mode or three-way operation in active mode with the RS15 Subwoofer is included in the PS15TDController-R2.

£592.98 (£711.58 Including VAT at 20%)

Nexo Geo S12TD Controller, The S12 TDcontroller is an advanced analogue processor that allows the S12 Series loudspeakers and companion NEXO Sub-Bass exceptional performance from mid-sized packages. The S12 TD provides crossover, sensed-amplifier control and optimized system equalization for any S1210/S1230 system. Each S12 TD presents two inputs and three outputs, L, R and summed sub out, minimizing installation costs and complexity.

Like all NEXO processors, the S12 TDcontroller provides precision dynamic, voice coil temperature and diaphragm displacement protection via selective Voltage Controlled Equalizers (VCEQs), reducing levels only at specific frequencies when and where necessary.

For more information: please download the S12 TDcontroller data sheet.

Features

• Audio Inputs
  • Two differential non floating L&R Audio inputs, 50 kΩ
  • Two XLR-3F connectors
• Sense Inputs
  • Three Amplifier Sense Inputs (S12 L&R, LS). 400 kΩ
  • 6 Pole Removable Strip Terminal
• Audio Outputs
  • Two L&R S12 Audio outputs. Balanced, non floating, 51Ω
  • Two XLR-3M.
  • One Mono (L+R) LS400 Audio output. Balanced, non floating,
  • 51Ω. One XLR-3M.
• Controls
  • Gain switch (back panel), 3 positions : -6 / 0 /+6dB.
  • Peak Limiter trimmer (500W-1200W/8Ω) for S12 & Sub-bass.
  • Sub Overlap / Crossover switch & Sub Gain Control (-/+ 6dB)
• Indicators LF speakers Protect Yellow LED's (Temp. & Disp), Power ON (green), Amp Sense & Peak LED's (green/Red)

Specification

• Output Section
  • +22 /+16/+10dBm typ. into 600Ω load
  • Back Panel switch on +6/0/-6dB respectively.
• Input Section Maximum input Level : 22dBu. CMRR 80dB @ 1kHz typ
• THD+N 0.2% @ 1kHz Typ. for +10dBm Output.
• Noisefloor S12TD -100 dBV for 0dB switch position (22Hz - 22kHz, Unweighted)
• Dynamic Range 111dB Unweighted (THD+N at-60dBr sine wave @1kHz rel.max. output)
• Crosstalk 104dB
• Filtering & EQ. L&R: 12dB/oct Low Pass, 12dB/oct High pass (crossover or overlap), 4 Parameter EQs. All factory tuned.
• Protections VCA temp. (Sub,LF & LF), VCEQ disp. (Sub & LF), Peak Limiter (all channels), Power compression regulation.
• Power Supply 100-250 Volts (continuous operation), 50/60Hz Power 9W. Peak Inrush current 0.5A. Earth-Lift.
• Conformity Comply with safety objective of 73/23/EEC & 89/336/EEC directives. (EN60065-12/2001, EN55103-1996). CB scheme
• DK-8371, cULus 60065 AZSQ E241312, FCC part15 class B
• Dimensions 1U 19" Rack. 165mm (6.5") Depth
• Weight 2.9 kg (6.6 lbs) net

System Operation

• Applicable Products The S12 TDcontroller is precisely matched to the S12 & RS15 Sub-Bass and includes sophisticated protection systems. Use of either product without a properly connected
• Controller will result in poor sound quality and may damage the components.
• Sub-Bass Active two-way operation of the S12 Loudspeaker with the associated RS15 Sub-Bass is included in the Analogue S12
• TDcontroller.

£272.81 (£327.37 Including VAT at 20%)

Nexo RSI-INSP15 RS15 Fixe installation cabinet to cabinet link. (Pair)

£547.37 (£656.84 Including VAT at 20%)

Nexo RST-BUMPER15 Bumper For RS15-C/P. (Maximum 16 Cabinets)

£259.65 (£311.58 Including VAT at 20%)

Nexo RST-DOLLY15 Dolly for RS15-C/P. (Maximum 3 Cabinets)

£426.32 (£511.58 Including VAT at 20%)

Nexo RST-FPLATES15 Rigging and Handles Set for RS15-C/P. (Pair)

£210.53 (£252.64 Including VAT at 20%)

Nexo RST-HANDLES15 Handles Set for RS15-C/P. (Pair)

£135.09 (£162.11 Including VAT at 20%)

Nexo RST-WHEELS15 Wheels Set for RS15-C/P. (Pair)