£32.28 (£37.93 Including VAT at 17.5%)

LED Moodstrip 300mm,  Moodstrip 300mm & 1000mm may be linked together and simply fixed to any surface.  This simple lightweight and cost effective way of illuminating any area such as bars, restaurants and ceilings.  Installation is simple.  Connect the controller to the strips and daisy chain them together mixing either sizes.  The controller will run up to 60 x 300mm strips.  Preset colours and mixing may be selected from the controller or should you wish to input DMX this will allow you to produce millions of colours.

• Lightweight, 
• fixing clips supplied
• DMX connection through controller
• Weather proof.

£65.14 (£76.54 Including VAT at 17.5%)

LED Moodstrip 1000mm,  Moodstrip 300mm & 1000mm may be linked together and simply fixed to any surface.  This simple lightweight and cost effective way of illuminating any area such as bars, restaurants and ceilings.  Installation is simple.  Connect the controller to the strips and daisy chain them together mixing either sizes.  The controller will run up to 20 x 1000mm strips.  Preset colours and mixing may be selected from the controller or should you wish to input DMX this will allow you to produce millions of colours.

• Lightweight, 
• fixing clips supplied, 
• DMX connection through controller,
• Weather proof.

£0.68 (£0.80 Including VAT at 17.5%)

LED Moodstrip Mounting Clip

£70.37 (£82.68 Including VAT at 17.5%)

LED Path light,  Enhance path lighting with the LG-100-24V-M Path Lamp, which is available in full colour change. In addition, a 24bit RGB pixel system provides the user with ultimate control to combine and create thousands of bright colours! Path lamps can also the programmed for seven-colour fading, chasing, strobe, and many other effects with its large memory of dynamic programs.

LG-100-24V-M Path Lamps are ideal for direct-lighting of building perimeter, as well as for steps, walk-ways, cinemas, security lighting theme parks and clubs. The LED Path can be submersed in up to 900mm of water - which makes them ideal for Pond and Waterfall lighting effects bringing your garden to life at night. Note that connections must be made waterproof by the installer.

Specifications

• Dimensions:  165mm Diameter, 100mm depth
• Protection rating: IP67
• Input power: 24V DC
• Power: 2.88 watts
• Beam Angle 30°

Installation of LG-100-24V

Connecting to the SRC-171 controller.
LG-100-24V-M is powered and controlled by SRC-171 LED controller, which is available with 220/230V input, 24V output. Used as an extensional cable to connect the SRC-171 & LG-100-24V-M, the 4-wire cable contains 4 wires in red, green, blue & white colours. Accordingly the 4 wires from the LG-100-24V-M will be connected to the 4 wires cable colour by colour using the cable clips. One SRC*171 can control up to 25 pieces of LG-100-24V-M, the distance of two lamps is recommended not to be longer than 2 meters

Connecting to DMX controller
The SRC-171 controller can receive signal from DMX controller. By programming on the DMX controller, the LG-100-24V-M, which is controlled by SRC-171, can be controlled and produce various effect set on the DMX-controller. The signal wire connecting the SRC-171 & DMX controller should be shorter than 300 meters; otherwise, a signal amplifier is necessary.

£154.88 (£181.98 Including VAT at 17.5%)

Transcension AR-32 Archi Recorder, The AR-32 system from Transcension allows you to manage lightshows with ease. The slim, compact controller can be wall mounted or placed on a table top. Programs can be downloaded into it from any DMX 512 controller.

Shows can be triggered automatically via the internal date/time clock or shows can be controlled from the included infra-red remote control. DMX can also be used to manually trigger the shows. Its amazing memory allows 8 shows of up to 4 pages each for a total of 32 show locations and even has the ability to record and play in real time.

Supplied with easy edit software you can connect the AR-32 via USB to any computer and edit the show data and upload it back to the AR-32. This system provides the perfect solution for controlling Moving heads, DMX dimmer packs and Architectural lighting.

Features

• 512 Channel Architectural real time recorder/playback system
• Record show hold and fade times
• DMX, Manual, Infrared and Auto trigger for show playback
• Link to PC (AR-32 Software) vi USB input
• Up to 32 shows assigned separately by AR-32 configuration software settings
• Up to 248 files (128M) can be recorded into memory to control DMX signal files
• Communication with P.C. via USB port
• Synchronize clock for Auto playback
• Set Auto On/Off times
• Table top or wall mountable
• Power failure memory
• 3 pin XLR DMX Input & Output

Specification

• Power supply: DC 12V, 500mA Min. by adaptor (included)
• Dimensions: 155 x 73 x 42mm
• Weight: 0.2kgs