LED Path light, Enhance path lighting with the LG-100-24V-M Path Lamp, which is available in full colour change. In addition, a 24bit RGB pixel system provides the user with ultimate control to combine and create thousands of bright colours! Path lamps can also the programmed for seven-colour fading, chasing, strobe, and many other effects with its large memory of dynamic programs.
LG-100-24V-M Path Lamps are ideal for direct-lighting of building perimeter, as well as for steps, walk-ways, cinemas, security lighting theme parks and clubs. The LED Path can be submersed in up to 900mm of water - which makes them ideal for Pond and Waterfall lighting effects bringing your garden to life at night. Note that connections must be made waterproof by the installer.
Specifications
- Dimensions: 165mm Diameter, 100mm depth
- Protection rating: IP67
- Input power: 24V DC
- Power: 2.88 watts
- Beam Angle 30°
Installation of LG-100-24V
Connecting to the SRC-171 controller.
LG-100-24V-M is powered and controlled by SRC-171 LED controller, which is available with 220/230V input, 24V output. Used as an extensional cable to connect the SRC-171 & LG-100-24V-M, the 4-wire cable contains 4 wires in red, green, blue & white colours. Accordingly the 4 wires from the LG-100-24V-M will be connected to the 4 wires cable colour by colour using the cable clips. One SRC*171 can control up to 25 pieces of LG-100-24V-M, the distance of two lamps is recommended not to be longer than 2 meters
Connecting to DMX controller
The SRC-171 controller can receive signal from DMX controller. By programming on the DMX controller, the LG-100-24V-M, which is controlled by SRC-171, can be controlled and produce various effect set on the DMX-controller. The signal wire connecting the SRC-171 & DMX controller should be shorter than 300 meters; otherwise, a signal amplifier is necessary.
