Robe Colour Wash 250AT, This eagerly awaited fixture completes Robe’s AT line of moving heads. A completely new optical system makes this fixture 50% brighter than its predecessor, the Wash 250XT. New ultra smooth CMY colour mixing offers a fantastic spectrum of hues. A motorized zoom effect ranges from 8 - 32° and the extremely silent cooling system and movement make this fixture a superb choice for TV and theatre. The colour wheel offers 6 saturated colours + open, using Robe’s renowned SLOT&LOCK system. Frost filter and a beam shaper are available on the effect wheel. As with all other Robe AT moving heads, 16-bit resolution is available for movement, colour wheel positioning and dimming.

• Lamp: Compact high-pressure metal halide lamp
• Base: GY-9.5
• Approved model: Philips MSD 250W/2
• Control: Automatic and remote on/off
• Ballast: Magnetic

• Wiring options – EU model: 208/230/240V AC, 50/60Hz
• Wiring options – US model: 100/120/208/230/240V AC, 50/60Hz
• Power consumption: 405 VA at 230V

• Height: 502 mm (19.8")
• Width: 419 mm (16.5")
• Depth: 438 mm (17.2")
• Weight – EU model: 20.5 kg (45.2 lbs), US model: 23.5 kg (51.8 lbs)

• Maximum ambient temperature: 45°C (113°F)
• Maximum surface temperature: 70°C (158°F)

• Protocol: USITT DMX-512
• Control channels: 16-20
• DMX channels: 4 protocol modes
• Built-in demo sequences
• Display: 4-digit LED display
• Pan/Tilt resolution: 16-bit
• Color Wheel positioning: 8- or 16-bit
• Zoom: 8- or 16-bit
• Dimmer: 8- or 16- bit
• Master/slave operating
• Movement control: tracking and vector
• Built-in analyzer for easy fault finding
• Data in/out: Locking 3-pin XLR & 5-pin XLR

• Cyan: 0-100%
• Magenta: 0-100%
• Yellow: 0-100%
• Colour wheel: 6 replaceable "SLOT&LOCK" dichroic filters + open
• Effect wheel: Beam Shaper rotated by 90°, Frost Filter
• Dimmer/Shutter: Full range dimming and variable strobe effect
• Zoom: Motorized zoom effect 8° - 32°
• Pan: 530°
• Tilt: 268°

• Mounting points: 4 pairs of ¼ turn locks
• 2x Omega brackets with ¼ turn quick locks

 




Related products:


Universal Moving Head Clamp £38.22 (£45.86 Including VAT at 20%) Universal Moving Head Clamp, The Universal Moving Head Truss Clamp allows you to keep your rigging clamps attached to you moving heads once loaded into flight cases. The middle clamp coupler folds flat, allowing you to leave the clamp on your fitting. The unit is supplied with 2 x M10 bolts in sliding grooves to allow fitting to various units. Specification Maximum Load: 150 kg Find Out More

 
Enter e-mail address to tell a friend