Robe Stage Banner 50AT, The latest in this series are the new StageBanner 50 AT and 50 AT Multimedia units, which follow on from massive interest in the StageBanner 10 AT. Both products have a load capacity of 50 Kg. The StageBanner is constructed to enable the displaying and rotation of advertising banners - at exhibitions, on stages, in theatres and for retail and ther applications where advertising needs to be highlighted and showcased.

StageBanner is fully DMX controllable! StageBanner also runs in a stand-alone mode, enabled by on-board programming via a 4-digit LED display on the unit’s base. Master/slave operation is also available for the straightforward connection of StageBanners with a serial cable, thereby controlling all fixtures via one. Rotation is possible in both directions at various speeds, and 16-bit DMX resolution ensures the speed of rotation is smooth and precise. A virtually silent cooling system makes the StageBanner ideal for situations where low noise is crucial. A neat rigging system utilizes two Omega clamps, so the StageBanner can be truss mounted in a huge variety of positions. The same Omega clamps are used for fixing the pipe or tube with the advertising banner.

• Wiring options, EU model: 208/230/240 V AC,  50/60Hz
• Wiring options, US model: 100/120/208/230/240 V AC, 50/60Hz
• Power consumption: 30VA

Mechanical Specification

• Height:& 214 mm (8.4")
• Width:& 474 mm (18.7")
• Length: 445 mm (17.5")
• Weight: 13.4 kg (29.5 lbs)

Thermal

• Maximum ambient temperature: 40°C (104°F)

Electronics

• Addressing, special functions setting via control panel with 4-digit LED display
• Readout fixture usage, receiving DMX values, temperature, etc
• Built-in analyzer for easy fault finding, error messages
• Built-in demo sequences
• Silent cooling
• Master/slave operation
• Digital serial input DMX-512
• 4 control channels

Pan

• 16-bit movement resolution
• Automatic pan position correction
• Remotely controllable speed of pan movement for easy programming
• Movement control: tracking and vector

Rigging

• Stands directly on the floor
• Mounts horizontally or vertically with 2 Omega brackets
• 2 truss orientation
• Safety chain/cord attachment point

Load Specification

• Max. load: 50kg

 


 
Enter e-mail address to tell a friend