QSC PLX 1104, The compact PLX1104 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. This two channel 1100w amplifier is designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1104 is perfect for ultra-portable rigs, as well as reference-quality playback.

Specification

• Stereo Mode 8 ohms (each channel):

FTC 20 Hz - 20 kHz 0.05% THD: 310W
EIA 1 kHz 0.1% THD: 325W

• Stereo Mode 4 ohms (each channel):

FTC 20 Hz - 20 kHz 0.05% THD: 500W
EIA 1 kHz 0.1% THD: 550W

• Signal to Noise (20 Hz - 20 kHz): -106 dB
• Input Sensitivity @ 8 ohms: 1.18 Vrms
• Gain @ 8 ohms: 32.5 dB
• Output Circuitry: AB
• Distortion (SMPTE-IM): Less than 0.02%
• Typical Distortion:

1/8 rated power, 20 Hz-20 kHz: Less than 0.02%
Full rated power, 20 Hz-20 kHz: Less than 0.02%

• Frequency Response: 20 Hz-20 kHz, -0.5 dB
• Damping Factor: Greater than 200
• Input Impedance: 20k ohms balanced, 10k ohms unbalanced
• Input Clipping: 5.5 Vrms (+15 dBu)
• Cooling: Variable-speed fan, rear-to-front air flow
• Input Connectors, each channel: 3-pin XLR and 1/4" TRS balanced
• Output Connectors, each channel: Neutrik® NL4 Speakon® (Both channels available on Ch 1 output)
• Rear Panel Switches: Circuit Breaker
• Front Panel Controls: Detented Input Attenuator: 0 to ∞ dB Power On/Off
• Front Panel Indicators: Clip: Red LED, -10: Green LED, Signal (-35 dB): Green LED, Power: Blue LED

Protection

• Amplifier Protection: Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection. Stable into reactive or mismatched loads
• Load Protection: On/off muting, DC-fault power supply shutdown
• Infrasonic: -3 dB, 8 Hz
• DC fault: Power supply shutdown
• Ultrasonic: -3 dB, 120 kHz
• Short Circuit: Muting
• Thermal: Limiting at 85° C, Muting at 90° C
• Over Current: Active clip limiting AC circuit breaker
• High Line: Standard +15%, survive +25%
• Low Line: -40%

Dimensions

• Height: 3.5" (8.9 cm) 2 rack spaces
• Width: 19" (48.3 cm)
• Depth, Rack mounting surface to rear panel: 8.95" (22.7 cm)
• Overall Depth: 11" (27.9 cm)
• Weight: 5.9 kg
• Agency Approvals: CCC, CB, CE, FCC, KETI, cUL, UL

Current Consumption

• 1/8 Power (pink noise): 8 ohms: 2.5A/240V, 4 ohms: 4A / 240V
• 1/3 Power (pink noise): 8 ohms: 4A/240V, 4 ohms: 6.2A / 240V
• Full Power: 8 ohms: 6.3A/240V, 4 ohms: 10.5A / 240V


 
Enter e-mail address to tell a friend