£41.33 (£48.56 Including VAT at 17.5%)

Wheel Bases - DJ Stand Accessory

The addition of wheel bases to any Ultimax stand turns your stand
into a dual shelved trolley instantly. Move your kit with ease.

Instant addition, very quick to fit
Can be permanently mounted
100% Spares Availability
Fits all Ultimax DJ Stands
Black Powder Coated Finish
Braked Wheels for locking in position

The easy way to convert DJ Stands into a trolley. Whichever way you transport your stand, when you get to the venue it has to be assembled anyway. By doing it at the van you can have a trolley with quite a massive surface area on two levels. Kit can often be loaded more or less in position and then wheeled into place. Wherever you might normally need a trolley, the addition of a set of wheel bases gives you the practical solution. In venues where kit has to be moved from room to room it is a massive asset. 
Whichever way you look at it the wheel bases make setting up and breaking down a lot easier.
They can be fitted and taken off in less than 2 minutes or bolted permanently on.
Fits all the Ultimax Professional DJ stands, the ProStand and the basic deck stand range.

Technical Data
Width 435mm
Height Added to DJ Stands when used 100mm approx.

£50.64 (£59.50 Including VAT at 17.5%)

The Gigbag- DJ Stand Accessory

Very heavy duty giant carry case for all Ultimax DJ stands.
Strong enough to carry stands, overheads and accessories

Smart Blue Finish
Wrap Around Velcro Handles
Tightening staps

Adjustable for different widths
Full Length Velcro Top Opening
Rip Resistant, Weatherproof Finish

Ultra-Heavy Duty Carry Bag for all Professional Ultimax DJ Stands.
Made from rip resistant, weather proof nylon, the Gigbag is made to take plenty of use and abuse.

Full wrap around webbing handles and full length velcro rip top.
Side velcro enables the bag to be set for all widths of stands thus giving the ability to centralise weight for balanced use.

Ttightening straps around the bag allow contents to be strapped tightly for easy transport.
Will hold all components of any Ultimax DJ Stand, the only restriction is the users ability to carry the weight enclosed.

Technical Data
Size 1900mm (max) x 650mm

£37.03 (£43.51 Including VAT at 17.5%)

Heavy Duty Tripod carry cases which will hold a pair of stands, as well as associated T-bars and fittings. Designed with a central divide to keep the two stands separate, they ensure ease of transport and protection for all tripods. Features Velcro rip top opening and full wrap around webbing carry handle.

SPECIFICATIONS:
1500mm L  x 480mm W

£22.70 (£26.67 Including VAT at 17.5%)

Deck Shelf - DJ Stand Accessory

Smart carpet covered deck boards
for rapid fixing and removal from deck stands.

Smart Durable Finish
Supplied with velcro dots
Heat Applied Carpet

Fold Under covering for best image
Quick to position and remove
Available for most Ultimax DJ Stands

Heavy duty Carpet Covered Deck Shelves supplied with velcro dots for easy fitting and removal from DJ Stands.
The velcro dots are applied to the framework of the stand and because the shelf covering is returned underneath the lower side of the board, the dots grip the board firmly, whilst allowing a very quick removal when required.
The carpet has been glued with a heated press to ensure durability.
Each shelf is supplied as a 1.2m piece and a make-up piece for other widths.

Technical Data
Depth 410mm
Width 1.2m