Free Standing Table Top Mirror Ball with Motor, 20cm diameter mirror ball for Table displays. Built-in battery housing and optional externally power source.. The inner ball is of PVC, with facets of high reflection mirror glass. 

• Power supply: 1.5V D Cell Battery, or External 1.5V 150mA power source (not supplied) 3.5mm jack socket
• On /Off Switch
• Speed: 2 rpm
• Overrule height of : 40 cm



Related products:


PAR 36 PINSPOT £9.72 (£11.66 Including VAT at 20%) PAR 36 Pinspot, Fitted with transformer & Gel / Lamp retainer clip. Lamp 6v 36W PAR36. Please note, lamp not included please see out lamp section. Available in black or silver - just chose from the option box when ordering. Dimensions Width: 116mm Length: 150mm Find Out More

PAR 36 30w 6v £2.44 (£2.93 Including VAT at 20%) PAR 36 30w 6v Screw Fitting, Beam Angle 5° x 5°. Find Out More

Table Top Mirror Ball Mains Adopter £11.03 (£13.24 Including VAT at 20%) Table Top Mirror Ball Mains Adopter / Power Supply, Slimline, regulated, AC/DC adaptor with 500mA  rating with selectable output voltage of 1.5, 3, 4.5, 6, 7.5, 9, and 12V DC outputs. The voltage selector switch is sited at the back of the unit to prevent accidental operation. Unit  supplied with 7 different output connectors to fit most devices and the Polarity is selectable. Output cable length of  1.8 meters. Find Out More

COLOURED GEL Sheet £7.37 (£8.84 Including VAT at 20%) Coloured Gels, Gelatine Colour Filter Sheet, Heat resistant, gelatine coloured filters for spotlights and lighting effects. Supplied in 530mm x 600mm (21" x 24") sheets. Available in the following colours Mauve 339 / 126 Light Blue 118 Dark Blue 120 Green 124 Deep Blue 119 Turquoise 116 Middle Rose 110 Yellow 102 Amber 104 Orange 105 Primary Red 106 Straw Tint 013 To order please select the colour you require and add to the shopping cart - repeat the process for each colour your require.    Find Out More

Replacement Mirror Ball For Table Mirror Ball £3.50 (£4.20 Including VAT at 20%) Replacement 20cm mirror ball for the Table mirror ball. 20cm diameter mirror ball The inner ball is of PVC, with facets of high reflection mirror glass.  Ideal to replace that damaged mirror ball at a low cost. Find Out More

3W LED Pinspot £42.92 (£51.50 Including VAT at 20%) 3W LED Pinspot, The 3 watt LED Pin Spot is a perfect replacement for the old fashioned pinspot. This LED Pin spot from Acme is ideal for bars, clubs, productions, as well as mobile DJs. Using a ultra-bright 3 watt white led, the Acme 3W LED Pinspot produces a crisp white beam from a 6 degree lens which is perfect for shining on mirror balls. You won't need to think about changing lamps ever again. Features Available in Black or White Finish Bright 3W white LED Pinspot with 6-degree beam angle Compact lightweight plastic case design Internal electronic transformer Long-life LED: 50,000 hour lamp life Very low heat output or power consumption Includes hanging bracket Supplied with replacement 11 degree lens Specification Power supply: 240V Dimensions: 145 x 75 x 50mm Weight: 0.5kgs Find Out More

Equinox 5W Pin Beam Pin Spot £29.21 (£35.05 Including VAT at 20%) Equinox 5W Pin Beam, The LED 5W Pin Beam offers the perfect replacement for costly lamp consuming traditional Par 36 pinspots. Featuring an exceptionally bright 5WLED, this lightweight fixture is ideal for mirror ball and fixed point illumination. Features Ultra Bright 5W White LED Beam angle: 10 degrees Specification Power supply: 240V Weight: 0.5g Find Out More

 
Enter e-mail address to tell a friend