Crown CTs3000: Of the Com-Tech® Series, Crown's CTs Series offers new flexibility and value for installed sound applications. The Com-Tech Series were the first to offer independent selection of high- and low-impedance operation for a specific channel, and CTs Series amplifiers continue that tradition, with power levels and features carefully chosen to perfectly integrate into fixed install design requirements.

Operating Features

• High power density. All two channel models and four channel model in a 2RU chassis, eight channel model in a 3RU chassis
• New Crown Switching Power Supply for lighter weight
• Selectable "Constant-Voltage" or low-impedance (4/8 ohm) operation per channel on 2-channel models, and per channel-pair on 4-and 8-channel models
• 100V direct outputs on CTs 2000, CTs 3000, CTs 4200, and CTs 8200
• Legendary Crown class I (BCA) and AB+B output topologies offer the best in amplifier reliability
• 4- and 8-channel models offer perfect independent power solutions for multi-zoned systems· New "FIT" (Fault Isolation Topology) circuitry on 4- and 8-channel models isolates fault conditions without affecting neighboring channels
• Comprehensive array of indicators provide accurate diagnostics
• Two-channel models are fully PIP2-compatible. Multi-channel models accept new MC accessory modules

CTs 3000 Performance

• Power Output: 1500W at 2 Ohms, 1500W at 4 Ohms, 1500W at 8 Ohms, 70V at 1500W, 100V at 1500W (per channel) 3000W  at 4 Ohms, 3000W at 8 Ohms, 3000W at 16 Ohms, 100V at 3000W, 140V at 3000W, 200V at 3000W (Bridge mode). 20Hz-20kHz Power: refers to maximum average power in watts at 20Hz-20kHz with 0.1% THD.
• Frequency Response (at 1 watt, 20Hz - 20 kHz) ±0.25 dB
• Phase Response (at 1 watt, 10Hz - 20 kHz) ±20°
• Signal to Noise Ratio below rated power (20 Hz to 20 kHz) <-102 dB A-weighted
• Total Harmonic Distortion (THD) at 1 watt, from 20 Hz to 20 kHz <0.05%
• Damping Factor 10 Hz to 400 Hz >3000
• Crosstalk (below rated power, 20 Hz to 1 kHz) >80 dB
• Common Mode Rejection (CMR) (20 Hz to 1 kHz) >50 dB
• DC Output Offset (Shorted input) <10 mV
• Input Impedance nominally balanced, nominally unbalanced 20 k ohms, 10 k ohms
• Maximum Input Level (before input compression) +20 dBu
• Load Impedance (Note: Safe with all types of loads) Stereo 2, 4, 8, 3 (70V), and 8 ohms (100V) Bridge Mono 4, 8, 16, 8 (140V), and 13 ohms (200V)
• Voltage Gain (at maximum level setting), 1.4V sensitivity 4/8 Ohm Operation 42.2:1 (33 dB) 70V Operation 39:1 (32 dB) 100V Operation 39:1 (32 dB)
• Required AC Mains 120V 60 Hz, 220/230/240V/50 Hz
• Power Draw at Idle (120VAC mains) All channels in 4/8 ohm mode 24W (Standby Mode) All channels in 70V mode 24W (Standby Mode)
• Cooling Variable-speed forced air
• Dimensions Width,19 in. (48.3 cm.) Height,3.5 in. (8.9 cm.) Depth 14 in. (35.6 cm.)
• Net Weight 26 lb (11.8 kg)