£187.48 (£224.98 Including VAT at 20%)

The Cloud PM4 Paging Microphones are designed for general purpose multizone applications and can also be used with non-Cloud products.  The Cloud PM range’s features:   Individual and multiple zone selection, Definable zone groups with group selection, Pre-announcement chime with internal chime sounder, TALK and CALL ALL buttons, BUSY L.E.D, Configurable two-layer announcement priority system, Auto-zone reset after announcement, Zone disable function. 

Please note:  The Cloud PM is designed to interface directly with recent Cloud products - such as the DCM-1 - via the Cloud Digital Paging Interface, which uses standard CAT-5 cable and RJ45 connectors. It may also be used with any other audio system equipped with ‘short-toground’ paging access for selecting the zone(s) to be paged. This includes the following current* Cloud products: • Z4ii and Z8ii Venue Mixers • CX163 and CX263 Mixers • 36/50 and 46/50 Integrated Mixer Amplifiers • Other, older Cloud products may also be compatible; Multiple PMs may be interconnected (via the Digital Paging Interface) to permit paging from more than one location. A total cable run of up 1 km is permissible, with a maximum of 32 PM units. Different models of PM may be intermixed on a single network. It is also possible to configure a PM to address only a subset of the available zones. The PM is also compatible with the older Cloud CDPM range of digital paging microphones. PM microphones and CDPM microphones may be freely intermixed on the Digital Paging Interface.

Technical Specifications

• Up to sixteen Zones are available in an installation.
• All PMs are fitted with sixteen access terminal so that any PM can be used as the mixer interface in a multiple PM system 
• PM4 Four zones: Can interface upto sixteen zones from linked PMs.

 Features 

• Pre announcement chime:  Choice of four chimes selected by internal jumper. Chime can be set off/on by internal jumper. Internal sounder. Can be set off/on by internal jumper. Chime Level control preset.
• Interconnectable:  PMs of any combination of zone sizes can be daisy chained using CAT5 cable 
• Bank shift:  A PMs pageable zones can be shifted around the available sixteen zones. Set by internal jumpers.
• Zone barring: A PM can be barred from accessing zones. Set by internal jumper 
• Group lock:  The group buttons can be locked to prevent tampering. Set by internal jumper.
• Priority:  A PM can be set to high priority enabling it to interrupt a low priority PM. Set by internal jumper.
• Microphone level Preset allows a PMs level to be trimmed Auto zone reset Allows a zone selection to be retained after a page. Set by internal jumper.

Performance:

• Directivity:  Unidirectional, cardioid pattern
• Microphone element:  Electret condensor
• Sensitivity (1KHz) 68 dB ± 3 dB ( 0 dB=1V/ μbar 1KHz indicated by open circuit)
• Frequency response 80 Hz ~ 16,000Hz 
• Internal compressor 

Controls - Elastomer push buttonswith SMD tact switches 

• Zone:  Select a zone for paging.
• Zone Light:  Indicates a zones selection.
• Clear:  Clear all selected zones 
• Talk:  Open a call to selected zones.
• Call all: Open a call to all zones available to the PM.
• Group:  Four group buttons give programmable zone selection.
• Busy Light:  Indicates when paging system is in use 

Connections 

• Analogue Use with traditional short to ground mixers.
• Microphone: Internal three poles screw terminal. Hot, cold and screen.
• Access Internal sixteen poles screw terminal allows any model of PM to interface the full sixteen zones available to an installation 
• Digital:  Use to interconnect PMs or interface to digital enabled mixers such as the Cloud DCM-1.
• RJ45 OUT:  Carries switching data and transmits analogue audio to the next daisy chained unit or mixer. Also receives power when connected to a mixer 
• RJ45 IN:  Carries switching data and receives analogue audio from other PMs. 
• Power Internal two poles screw terminal. Power from mixer via access cable 2.1mm concentric power jack.
• Use an external PSU RJ45 OUT socket Power from mixer via CAT5 cable Power - VoltageInternal screw terminal 12 -24VDC External. 
• 2.1mm jack 12 - 24VDC, 9-17VAC. 
• RJ45 OUT socket 12 -15VDC from mixer.
• Power - Consumption PM4 55mA, 

Physical Dimension

• Width 245mm Height (not including gooseneck) 65mm Depth 170mm Gooseneck 300mm .
• Weight 1.2kg 

Physical Finish 

• Cabinet Black rubberised ABS Base Slate grey painted steel Gooseneck.
• Black painted brass.
• Mounting Rubber feet.

Cables -Analogue 

• Audio Twin core screened (Microphone cable). 
• Access Screened multicore. 1 core per zone, 1 core for ground, plus 1 core for power if powered by mixer Maximum length 100m.
• Cables - Digital Type Cat 5 Maximum length 1km total.
• Maximum connected PMS 32

£234.34 (£281.21 Including VAT at 20%)

The Cloud PM12 Paging Microphones are designed for general purpose multizone applications and can also be used with non-Cloud products.  The Cloud PM range’s features:   Individual and multiple zone selection, Definable zone groups with group selection, Pre-announcement chime with internal chime sounder, TALK and CALL ALL buttons, BUSY L.E.D, Configurable two-layer announcement priority system, Auto-zone reset after announcement, Zone disable function. 

Please note:  The Cloud PM 12 is designed to interface directly with recent Cloud products - such as the DCM-1 - via the Cloud Digital Paging Interface, which uses standard CAT-5 cable and RJ45 connectors. It may also be used with any other audio system equipped with ‘short-toground’ paging access for selecting the zone(s) to be paged. This includes the following current* Cloud products: • Z4ii and Z8ii Venue Mixers • CX163 and CX263 Mixers • 36/50 and 46/50 Integrated Mixer Amplifiers • Other, older Cloud products may also be compatible; Multiple PMs may be interconnected (via the Digital Paging Interface) to permit paging from more than one location. A total cable run of up 1 km is permissible, with a maximum of 32 PM units. Different models of PM may be intermixed on a single network. It is also possible to configure a PM to address only a subset of the available zones. The PM is also compatible with the older Cloud CDPM range of digital paging microphones. PM microphones and CDPM microphones may be freely intermixed on the Digital Paging Interface.

Technical Specifications

• Up to sixteen Zones are available in an installation.
• All PMs are fitted with sixteen access terminal so that any PM can be used as the mixer interface in a multiple PM system 
• PM12 Twelve zones : Can interface upto sixteen zones from linked PMs 

 Features 

• Pre announcement chime:  Choice of four chimes selected by internal jumper. Chime can be set off/on by internal jumper. Internal sounder. Can be set off/on by internal jumper. Chime Level control preset.
• Interconnectable:  PMs of any combination of zone sizes can be daisy chained using CAT5 cable 
• Bank shift:  A PMs pageable zones can be shifted around the available sixteen zones. Set by internal jumpers.
• Zone barring: A PM can be barred from accessing zones. Set by internal jumper 
• Group lock:  The group buttons can be locked to prevent tampering. Set by internal jumper.
• Priority:  A PM can be set to high priority enabling it to interrupt a low priority PM. Set by internal jumper.
• Microphone level Preset allows a PMs level to be trimmed Auto zone reset Allows a zone selection to be retained after a page. Set by internal jumper.

Performance:

• Directivity:  Unidirectional, cardioid pattern
• Microphone element:  Electret condensor
• Sensitivity (1KHz) 68 dB ± 3 dB ( 0 dB=1V/ μbar 1KHz indicated by open circuit)
• Frequency response 80 Hz ~ 16,000Hz 
• Internal compressor 

Controls - Elastomer push buttonswith SMD tact switches 

• Zone:  Select a zone for paging.
• Zone Light:  Indicates a zones selection.
• Clear:  Clear all selected zones 
• Talk:  Open a call to selected zones.
• Call all: Open a call to all zones available to the PM.
• Group:  Four group buttons give programmable zone selection.
• Busy Light:  Indicates when paging system is in use 

Connections 

• Analogue Use with traditional short to ground mixers.
• Microphone: Internal three poles screw terminal. Hot, cold and screen.
• Access Internal sixteen poles screw terminal allows any model of PM to interface the full sixteen zones available to an installation 
• Digital:  Use to interconnect PMs or interface to digital enabled mixers such as the Cloud DCM-1.
• RJ45 OUT:  Carries switching data and transmits analogue audio to the next daisy chained unit or mixer. Also receives power when connected to a mixer 
• RJ45 IN:  Carries switching data and receives analogue audio from other PMs. 
• Power Internal two poles screw terminal. Power from mixer via access cable 2.1mm concentric power jack.
• Use an external PSU RJ45 OUT socket Power from mixer via CAT5 cable Power - VoltageInternal screw terminal 12 -24VDC External. 
• 2.1mm jack 12 - 24VDC, 9-17VAC. 
• RJ45 OUT socket 12 -15VDC from mixer.
• Power - Consumption PM12 67mA.

Physical Dimension

• Width 245mm Height (not including gooseneck) 65mm Depth 170mm Gooseneck 300mm .
• Weight 1.2kg 

Physical Finish 

• Cabinet Black rubberised ABS Base Slate grey painted steel Gooseneck.
• Black painted brass.
• Mounting Rubber feet.

Cables -Analogue 

• Audio Twin core screened (Microphone cable). 
• Access Screened multicore. 1 core per zone, 1 core for ground, plus 1 core for power if powered by mixer Maximum length 100m.
• Cables - Digital Type Cat 5 Maximum length 1km total.
• Maximum connected PMS 32

£251.38 (£301.66 Including VAT at 20%)

The Cloud PM16 Paging Microphones are designed for general purpose multizone applications and can also be used with non-Cloud products.  The Cloud PM range’s features:   Individual and multiple zone selection, Definable zone groups with group selection, Pre-announcement chime with internal chime sounder, TALK and CALL ALL buttons, BUSY L.E.D, Configurable two-layer announcement priority system, Auto-zone reset after announcement, Zone disable function. 

Please note:  The Cloud PM is designed to interface directly with recent Cloud products - such as the DCM-1 - via the Cloud Digital Paging Interface, which uses standard CAT-5 cable and RJ45 connectors. It may also be used with any other audio system equipped with ‘short-toground’ paging access for selecting the zone(s) to be paged. This includes the following current* Cloud products: • Z4ii and Z8ii Venue Mixers • CX163 and CX263 Mixers • 36/50 and 46/50 Integrated Mixer Amplifiers • Other, older Cloud products may also be compatible; Multiple PMs may be interconnected (via the Digital Paging Interface) to permit paging from more than one location. A total cable run of up 1 km is permissible, with a maximum of 32 PM units. Different models of PM may be intermixed on a single network. It is also possible to configure a PM to address only a subset of the available zones. The PM is also compatible with the older Cloud CDPM range of digital paging microphones. PM microphones and CDPM microphones may be freely intermixed on the Digital Paging Interface.

Technical Specifications

• Up to sixteen Zones are available in an installation.
• All PMs are fitted with sixteen access terminal so that any PM can be used as the mixer interface in a multiple PM system 
• PM16 Sixteen Zones:

 Features 

• Pre announcement chime:  Choice of four chimes selected by internal jumper. Chime can be set off/on by internal jumper. Internal sounder. Can be set off/on by internal jumper. Chime Level control preset.
• Interconnectable:  PMs of any combination of zone sizes can be daisy chained using CAT5 cable 
• Bank shift:  A PMs pageable zones can be shifted around the available sixteen zones. Set by internal jumpers.
• Zone barring: A PM can be barred from accessing zones. Set by internal jumper 
• Group lock:  The group buttons can be locked to prevent tampering. Set by internal jumper.
• Priority:  A PM can be set to high priority enabling it to interrupt a low priority PM. Set by internal jumper.
• Microphone level Preset allows a PMs level to be trimmed Auto zone reset Allows a zone selection to be retained after a page. Set by internal jumper.

Performance:

• Directivity:  Unidirectional, cardioid pattern
• Microphone element:  Electret condensor
• Sensitivity (1KHz) 68 dB ± 3 dB ( 0 dB=1V/ μbar 1KHz indicated by open circuit)
• Frequency response 80 Hz ~ 16,000Hz 
• Internal compressor 

Controls - Elastomer push buttonswith SMD tact switches 

• Zone:  Select a zone for paging.
• Zone Light:  Indicates a zones selection.
• Clear:  Clear all selected zones 
• Talk:  Open a call to selected zones.
• Call all: Open a call to all zones available to the PM.
• Group:  Four group buttons give programmable zone selection.
• Busy Light:  Indicates when paging system is in use 

Connections 

• Analogue Use with traditional short to ground mixers.
• Microphone: Internal three poles screw terminal. Hot, cold and screen.
• Access Internal sixteen poles screw terminal allows any model of PM to interface the full sixteen zones available to an installation 
• Digital:  Use to interconnect PMs or interface to digital enabled mixers such as the Cloud DCM-1.
• RJ45 OUT:  Carries switching data and transmits analogue audio to the next daisy chained unit or mixer. Also receives power when connected to a mixer 
• RJ45 IN:  Carries switching data and receives analogue audio from other PMs. 
• Power Internal two poles screw terminal. Power from mixer via access cable 2.1mm concentric power jack.
• Use an external PSU RJ45 OUT socket Power from mixer via CAT5 cable Power - VoltageInternal screw terminal 12 -24VDC External. 
• 2.1mm jack 12 - 24VDC, 9-17VAC. 
• RJ45 OUT socket 12 -15VDC from mixer.
• Power - Consumption:  PM16 73mA .

Physical Dimension

• Width 245mm Height (not including gooseneck) 65mm Depth 170mm Gooseneck 300mm .
• Weight 1.2kg 

Physical Finish 

• Cabinet Black rubberised ABS Base Slate grey painted steel Gooseneck.
• Black painted brass.
• Mounting Rubber feet.

Cables -Analogue 

• Audio Twin core screened (Microphone cable). 
• Access Screened multicore. 1 core per zone, 1 core for ground, plus 1 core for power if powered by mixer Maximum length 100m.
• Cables - Digital Type Cat 5 Maximum length 1km total.
• Maximum connected PMS 32

£67.75 (£81.30 Including VAT at 20%)

Cloud LM-1 Remote Active Module, For Use With Cloud Products Z4II & Z8II

• One Balanced Microphone input
• One Line Level Music Input
• Separate Mic Level And Music Level Controls
• Music Source Select And Level Control
• Microphone Priority Switch To Reduce Music Level When Mic Is Used

• 146mm x 85.8mm Fits Standard UK Double Electrical Sockets (13A type) Backbox

  
  Find Out More

£72.73 (£87.28 Including VAT at 20%)

Cloud DM-1 Remote Active Module, For Use With Cloud Products Z4II & Z8II & MPA-626

• Two Low Impedance, Balanced Microphone Inputs
• Individual Microphone Level Controls
• Tamperproof Microphone HF & LF Controls
• Music Ducking Button
• Can Be Wired In Multiples In A 'Daisy Chain' Format
• 146mm x 85.8mm Fits Standard UK Double Electrical Sockets (13A type) Backbox
  
  Find Out More

£27.61 (£33.13 Including VAT at 20%)

Cloud RSL-6(A), Remote Wall Plate To Control Music Source & Music Level - For Use With Cloud Products, CX263, CX462, 36/50, 46/50, Z4,Z8 and Z4II & Z8II

• RSL-6 Dimensions: UK Style 85.8 x 85.8mm

• RSL-6A Dimensions: US Style 69.8 x 114.3mm

  
  Find Out More

£15.68 (£18.82 Including VAT at 20%)

Cloud RL-1(A), Remote Music Level Control - For Use With Cloud Products Z4II & Z8II, CX263, CX133, CX242, CX462 36/50, 46/50
and Cloud Products CX-A6, CX-A4, MPA-626, CX-A450 & CX-A850

• RL-1 Dimensions: UK Style 85.8 x 85.8mm

• RL-1A Dimensions: US Style 69.8 x 114.3mm


Find Out More

£26.76 (£32.11 Including VAT at 20%)

Cloud XLR-F1 Wall Plate, For General Use.

• Wall Plate With Female 3 Pin XLR Type Latching Connector

• 85.8 x 85.8mm In Size, Fits A Standard UK Electrical Backbox

  
  Find Out More

£26.76 (£32.11 Including VAT at 20%)

Cloud XLR-M1 Wall Plate, For General Use.

• Wall Plate With Male 3 Pin XLR Type Latching Connector

• 85.8 x 85.8mm In Size, Fits A Standard UK Electrical Backbox

  
  Find Out More

£45.22 (£54.26 Including VAT at 20%)

BOSE EQ Modules to optimize Cloud Speakers

• Single Channel EQ Card for Models: 402II, 502A, 502B, 502BEX, 802III, 3202II, 4402II, 9402II, 9702II, LT MB24, Model 16, 32/25, 8, MA12, MA12 Single, MA12 Stack and MB4
• For Use With Cloud Products, EQ adaptor may be required.
• Internally Mounted