£76.57 (£91.88 Including VAT at 20%)

Slimline LED RGB IR Master Head, The RGB Slim Line LED master head is a great way to light up any venue, bar, up light marquees and many other applications. This slim line and silent running RGB projector is a perfect solution for many applications. The Slimline LED Master Heads are fitted with a Infra Red receiver so you can control the units, sound to light, DMX address, Strobe, Static Colour and more with the VrIR remote control. Additional slave heads may be used in conjunction with the master head. Each unit is easy to set up and we can also supply power link leads, together with double yoke bracket for up-lighting.

Features & Specification

• 40 Degree Beam Angle
• TV Ready 410 Hz Chips Flicker Free
• Pre programmed colour mixes
• Sound to light sensitivity control
• Infra Red Remote control sensor - for easy control, simple to re-program from the ground
• White or Black finish
• Master slave power (unit is fitted with Male and Female IEC power connections)
• DMX 512 with 3 pin XLR's Male / Female (In & Out) 
• DMX can be used to control slave heads or for use with an external controller if required.
• Slimline 68mm thick. and easy to install
• 180 x 10mm Ultra bright LEDs
• UV safe and virtually no heat produced.
• Silent operation No Fan
• Supplied with matching colour  3 meter mains lead IEC to 13amp Plug
• Power: 240v AC, 50Hz. @ 30W 
• Dimensions: 221mm x 221mm x 68mm
• Weight: 1.2 Kg

Optional extras please order Separately

• Infra Red Remote controller
• 600mm, Black or White Mains Power IEC lead Male to female extension lead 
• 3M, Black or White Mains Power IEC lead Male to female extension lead 
• 5M, Black or White Mains Power IEC lead Male to female extension lead 

£140.02 (£168.02 Including VAT at 20%)

Ryger FL-P1 DMX LED Lighting Controller, The FL-P1 is an easy to use DMX controller for RGB LED lighting. Virtually no DMX knowledge is required by the user. Designed for the static type of fixture ie: Parcans, Battens and Panels etc. Perfect for DJ’s, Bands and fixed installation. NO COMPLICATED PROGRAMMING REQUIRED! The FLP1 controls the Red, Green & Blue channels of LED lighting fixtures.

The programming of the FL-P1 has already been pre-set for the user. All you need to do is select from our list which profile group your fixtures belong to. Fixtures can be of different type and manufacture but they all must be listed within the same profile group. Then simply set the starting address or dip switches as explained in the user manual.

8 fixtures can be controlled individually by this unit creating a superb lightshow, sequencing and chasing in an organised manner rather than being left to their own uncontrolled stand-alone features. More fixtures can be added by pairing them up i.e: if you have 16 parcans you will have 2 lamps illuminating at the same time on an 8 channel chase.

Features

• 100 pre-programmed patterns, floods & soft fades
• Easy instant blackout & flood controls
• Variable speed on patterns
• Sound activation on patterns
• Easy dimming
• User definable main flood button
• 2 Auto modes

Multi use

• Table top for DJ’s
• Foot controlled for Bands (Red Buttons are foot-proof)
• Wall mount for installations (optional mounting brackets required)

Which fixtures are compatible with the Ryger FL-P1?...

This page lists the Profile Groups for many fixtures and what DMX mode those fixtures will operate successfully with. Most lighting battens and panels operate in their 3 or 4 channel configuration (see their individual user manual for settings). Normally this will make them operate as a single colour - like an LED parcan. If your fixture is not listed, look at the DMX channels that a particular Profile Group operates and identify these settings in your fixtures user manual - also email your fixture details to Ryger and we will add your fixture to a profile group.

Many Parcans need DIP SWITCH 10 set to ON to receive DMX signals. Any fixtures within the same profile group will operate together - so you can mix and match. But only from within the same group - fixtures from another group may not function correctly if connected to this controller. Exceptions to this rule are fixtures using CH1, 2, 3 for RGB but NO other channels for modes and dimming (mainly profile D1 fixtures) - these can usually operate correctly within any other profile using 1, 2, 3, for RGB that also list Dimmers and Modes as active because they will ignore the extra channels being used. AMBER & WHITE fixtures will only operate in RGB colours.

Profile d0 - 1CH RED, CH2 GREEN, CH3 BLUE, CH4 DIMMER at 255

• Acme CF-805 Color Bar (4ch mode), Acme Slimline LED Parcan (Mode2)
• Eurolite LED T-36 Parcan, Eurolite LED Par 56, Eurolite LED Par 64
• JB Systems LED Spot, JB Systems LED Wash
• Lanta Fireball TRI Par 64 (5ch mode), Lanta Aurora 500 (5ch mode), Lanta Aurora 1000 (5ch mode)
• Lanta Fireball Par 64 Pro (5ch mode), Lanta Fireball Meteor (4ch mode), Lanta Fireball Comet (5ch mode)
• LEDJ RGB 252, LEDJ Alu Par 64, LEDJ Alu Tri Par 64, LEDJ Par 56 Parcan or LEDJ Par 64 Parcan (may be profile d6)
• LEDJ Spectra Batten 76, LEDJ Spectra Batten 76A LEDJ Fixtures may need dip switch 10 set to ON (function)
• Multiform PS020A DMX Power Supply
• Tryka Module 12 Easy Driver

Profile d1 - CH1 RED, CH2 GREEN, CH3 BLUE

• Acme LED Colour Spot
• ADJ Punch LED Pro (3ch mode), ADJ Mega TriBar (3ch mode), ADJ Mega Panel (3ch Mode)
• ADJ Mega Bar (3ch mode) ADJ Mega Bar Pro (3ch mode)
• Equinox Maxibar (3ch mode), Equinox Megabar (3ch mode)
• i-Solutions Stage Wash (3ch - no white), i-Solutions Color Bar 12TC (3ch mode)
• KAM LED 800 (3ch mode), KAM LED 800S (3ch mode), KAM LED Quad Bar mk1
• Lanta Orion Arc (3ch mode), Lanta Orion Link LED Bar (3ch mode), Lanta Aurora 12T (3ch mode)
• Lanta Jupter Spectrum, Lanta Jupiter Blackhole UV (3ch mode)
• Showtec RGB LED Spot, Showtec Par 36 short LED, Showtec Par 56 short LED, Showtec Par 64 short LED
• Showtec LED RGB Par 64 (3ch mode), Showtec Design Par 18 (arc1 mode)

Profile d2 - CH2 RED, CH3 GREEN, CH4 BLUE, CH1 DIMMER at 255

• Chauvet Colorado 1 Tri Tour (Tour mode)
• KAM LED Par 36, KAM LED Par 56, KAM LED Par 64m
• Lanta Fireball Par 64
• LEDJ Spectra Par 88, LEDJ Spectra Flood 87, LEDJ Omni Tri, LEDJ Colour Burst, LEDJ Xterior Wash

Profile d3 - CH4 RED, CH5 GREEN, CH6 BLUE, CH2 DIMMER at 255, CH1 Mode at 21

• LEDJ Pixel Bar (6ch mode), LEDJ Spectra Batten 75 - 75a, LEDJ Pro RGB Spectra Batten 1.0m

Profile d4 - CH1 RED, CH2 GREEN, CH3 BLUE, CH6 DIMMER at 63

• ADJ Par 36 Parcan, ADJ Par 56 LED Plus, ADJ Par 64 LED Plus, ADJ P56P Parcan,

Profile d5 - CH1 RED, CH2 GREEN, CH3 BLUE, CH7 DIMMER at 255

• KAM LED Powercan 24W (3ch or 7ch mode), KAM LED Powercan 36W (3ch or 7ch mode)
• KAM LED Powercan 54W (3ch or 7ch mode)

Profile d6 - CH1 RED, CH2 GREEN, CH3 BLUE, CH4 DIMMER at 189

• ZOOM Slimline Par 64 LED (dip10 on for DMX),
• LEDJ Par 56 or LEDJ PAR 64 (may be profile d9)

Profile d7 - CH2 RED, CH3 GREEN, CH4 BLUE

• Batmink Par 56
• Pulse Par 56 Eco
• Starville LED Par 56

Profile d8 - CH1 set at 255, CH2 Dimmer at 255, CH3 RED, CH4 GREEN, CH5 BLUE

Available on controllers from NOV 2010 onwards only - Earlier FL-P1 can have their firmware updated

Profile d9 - CH2 RED, CH3 GREEN, CH4 BLUE, CH1 Mode at 210

• Chauvet Colour Strip (3ch mode)

Many Parcans need DIP SWITCH 10 set to ON to receive DMX signals.

If your fixture is not listed in any of the profiles - email us with your user manual information and we will identify your profile group or create a new profile group for the controller. We welcome any user info on other LED fixtures that may operate with the FL-P1So if yours is not listed but you have found a correct profile please let us know.

TIP

One way of locating a profile if you don’t know it is to set your fixture into it’s 3channel mode (if this is required). Set the first fixture address position to 1 ON. (activate dip 10 if this is required for DMX operation). Then start the FL-P1 selecting profile ‘d0’Next go into ‘FA’ mode on the controller and see if the RGB & Dimmer sliders function as expected. If not - restart the controller selecting profile ‘d1’ and repeat the above procedure as often as needed working through the profiles, repeat as required until your fixture operates correctly. This number is then your profile.

£901.00 (£1,081.20 Including VAT at 20%)

Wedding/Function LED Batten Package, Here we have a very discrete but at the same time extremely effective LED lighting package for uplighting marquees and function rooms. Our White Case LED RGB Battens feature on board DMX and also allow you to use master/slave functionality. With the touch of a button you can transform a room in seconds, whether it be a warming red, a vibrant blue or a montage of colours, these battens are the perfect portable LED marquee lighting solution.

Package Includes:

• 6 x LED Spectra Batten (White Case)
• 3 x Protex Spectra Batten Case
• 5 x 5M IEC Extension Cables
• 5 x 5M DMX Cables

Give your self more control of the LED Battens by using a DMX Lighting desk - Please see related items below.

The DMX lighting desk enables you to program the LED Battens to perform however you like. Whether you want them to chase down a wall or program them to follow your preferred sequence, the lighting desk will give you full control.

Product Infomation

LED RGB Spectra Batten (White Case), This small, compact and lightweight unit is packed with 252 Ultra bright LED's. On board features include colour mixing to create soft washes from its rich colour pallet and chase programs controlled in auto mode or activated by the music. Several different chase programs are included and can be selected by the control panel along with brightness and speed.

Multi-purpose mounting hardware comes supplied with each fixture so they can be positioned in a number of ways, depending on what the venue requires. The cleverly designed bracket allows the unit to be mounted on trussing or hung from the ceiling.

Features

• DMX Channels: 12
• Blackout/static/dimmer/strobe
• Sound active mode
• Auto mode
• Static colour mixing via control panel
• RGB colour mixing via control panel
• Internal programmes with sound activation
• Speed control
• Master/slave
• 252 Ultra Bright 10mm LEDs ( R:108, G:72, B:72 )
• Power consumption: 50 watts
• Beam: 40 degrees
• Lamp life: 100,000 hours

Specification

• Power supply: 240v
• Dimensions: 1000 x 80 x 75mm
• Weight: 4.2kgs

Protex Spectra Batten Case (Excluding IP Models), Protect your 1M Battens with this foam lined Protex batten case. This case will hold 2 x spectra battens or similar along with a separate compartment for a controller, cables or clamps etc.. Strong water resistant polypropylene construction, this case also features a fully removable lid, strong webbed handles and steel reinforced edges with nickel rivets.

Features

• Holds 2 units + Controller or cables etc..
• Protection foam
• Lightweight

Specification

• Dimensions: 1270 x 75 x 91mm (total)
• Dimensions: 2 @ 1070 x 65 x 91mm (battens)
• Dimensions: 150 x 75 x 91mm (compartment)

£1.29 (£1.55 Including VAT at 20%)

Replacement 10mm LEDs for RGB Led Par Cans & Battens, Replacement 10mm LEDs for RGB Led Par Cans & Battens, Available in Red, Green & Blue.