FBT Jolly Sub 12A Processed Active Sub-woofer 300W

Features

• Vented band pass active subwoofer with 320 mm driver
• Enclosure in 18 mm birch plywood with internal reinforcement and scratch-resistant finish, ergonomically placed carry handles, integral speaker socket for satellite speakers
• High 123dB SPL thanks to the special loading design that serves to increase efficiency with significant reduction of distortion at high volume
• Reduced size in relation to power output and extension of frequency response (45Hz @ -6dB)
• The ideal companion for loudspeakers in the FBT Jolly5 and FBT Jolly8 series to strengthen bass frequencies and extend the response range, resulting in total increase of SPL
• Extend the response range, resulting in total increase of SPL
• Custom 250 mm woofer with 51 mm high linear excursion coil
• Built-in 300Wrms MOS-FET amplifier
• ADAP® (Advanced Dynamic Active Protection) designed to limit amplifier saturation and speaker excursion, guaranteeing complete reliability even in extreme conditions
• Active 24dB filter with subsonic filter and 12db filtered output for satellite speakers
• Control panel with: combo inputs (jack - XLR) Left and Right inputs, XLR Link, XLR filtered output for satellites, volume control, ground lift switch, 0° - 180° phase reversal switching

Specifications

• Configuration: 1 Vented Band pass way
• Built-in amplifier: 300 W rms
• Frequency response: 40Hz-120Hz @-6dB
• Low frequency woofer: 1x12" - 2,5" Ø coil inch
• High frequency driver:
• Sensitivity (@1W/1m): 101 dB
• Maximum SPL: 126 dB
• Dispersion:
• Input impedance: 22 kOhm
• Crossover frequency: active 120Hz
• Input connectors: combo / XLR M  
• Power cord: 5 m
• Net dimensions (WxHxD): 410x550x590 mm
• Net weight: 35 kg
• Shipping dimensions (WxHxD): 430x580x610 mm
• Shipping weight: 38 kg