£1,101.73 (£1,294.53 Including VAT at 17.5%)

Nexo PS10-R2 Loudspeaker, A high power system capable of producing 132 dB Peak SPL, the new PS10-R2 Loudspeaker can be safely driven with up to 1250 Watts of amplifier power. Controlled by the new, dedicated PS10 TDController-R2, or the NXAMP Powered Controller, the PS10-R2 achieves high SPLs and wide bandwidth performance, despite being only half the weight and volume of common trapezoidal loudspeaker systems.

Along with the flexible coverage patterns enabled by NEXO’s proprietary constant directivity asymmetrical dispersion horn, the architecture and weight balance of the PS10-R2 are designed to provide both uncompromised PA and stage monitor performance from a single speaker. Left and Right versions of the PS10-R2 have been developed to provide a true stereo image – particularly important for wedge applications.

The 2-way passive 8Ω design uses a single amplifier channel to deliver bi-amped performance, reducing system cost, size and complexity, while the new cabinet design incorporates a pole mount and a new hardware adapter compatible with a vast array of touring and fixed installation accessories.

Features

• High-power system (132dB Peak SPL@1m) with 10in LF and 1in HF drivers.
• Rotatable asymmetrical horn and unique cabinet architecture ensure versatility.
• User-adaptable for both PA and stage monitoring applications.
• Two-way passive 8Ω design uses a single amplifier channel for simpler installation and lower cost.
• Sophisticated control electronics ensure reliable, linear operation.
• Supported with a full range of mounting and flying accessories.

System Applications

• Touring, installed PA for clubs, A/V, theatre, broadcast, Houses of Worship, etc. High-quality stage monitoring for cabarets A/V, theatre, broadcast, etc.
• Fill-in system for use with larger NEXO PS/Alpha systems, or any application needing exceptional side, down and near-field augmentation.

PS10-R2 Loudspeaker Product Features

• Components
  • 1 x 10" (25cm) Shielded Neodymium 8Ω driver.
  • HF 1 x 1" throat driver + Low Distortion Constant Directivity Asymmetrical Dispersion Horn.
• Height x Width x Depth 515mm x 316mm x 277 mm (20.28" x 12.44" x 10.91").
• Weight 14 kg (31 lbs).
• Connectors 2 x NL4MP Speakon 4 pole.
• Construction Baltic Birch Ply finished with structured black coating.
• Fittings 2 Metal recessed pockets.
• Front finish Moulded Dark Grey Metal Grill.
• Flying Points One plate connecting with external accessories.
• Stand fittings Built in Steel Stand Fitting, (35mm / 1 3/8").

System Specifications PS10-R2 with PS10 TDController-R2

• Frequency Response [a] 65 Hz - 20 kHz ±3dB.
• Usable Range @-6dB [a] 58 Hz - 21 kHz.
• Sensitivity 1W @ 1m [b] 99 dB SPL Nominal – 97 dB SPL Wideband.
• Nominal Peak SPL @ 1m [b] 129 to 132 dB Peak.
• HF Dispersion [c] 50° to 100° Hor. x 55° Vert. Rotatable Horn, 4 positions.
• Directivity Q & DI [c]
  • Q : 16 Nominal DI : 12 dB Nominal.
  • ( f > 3 kHz )
• Crossover Frequencies 2 kHz Passive.
• Nominal Impedance 8Ω
• Recommended Amplifiers 500 to 1250 W / 8 Ω.

System Operations

• Electronic Controller The PS10 TDController-R2 is precisely matched to the PS10-R2 & LS600 cabinets and includes sophisticated protection systems. Using PS10-R2 & LS600 without a properly connected PS10 TDController-R2 will result in poor sound quality and can damage the components.
• Dispersion configuration After dismounting front grill from its fixings, the HF Horn can be rotated in 4 positions for dispersion configuration.
• Sub-bass The PS10-R2 can be used without optional LS600 Sub-Bass. Active two-way operation with the LS600 is included in the PS10 TDController-R2. One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced LF capability.
• Speaker Cables PS10-R2 are wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons are present on both. Single identical cables can thus be used to loop through combinations of up to 2 x PS10-R2 & 1 x LS600 in no particular order.

£1,288.27 (£1,513.72 Including VAT at 17.5%)

Nexo LS600 Subwoofer, A high power system capable of producing 138 dB Peak SPL, the new LS600 Sub-Bass extends the usable range of the PS10-R2 Loudspeaker to 38Hz, providing exceptional performance and high power output in an extremely compact, light weight package. The PS10 TDController-R2’s integral sub section and combined signal (PS10-R2 and LS600) Speakon wiring ensure cost effective and simple system implementation. One LS600 is typically used with two PS10-R2 loudspeakers, additional units may be used for an enhanced effect.

Features

• High-power system (138dB Peak SPL @ 1m) with 15in VLF long excursion driver.
• VLF extension (to 38Hz) of PS10-R2 Loudspeakers.
• Sophisticated control electronics ensure reliable, linear operation.
• Integral pole mount that supports one or two PS10-R2 Loudspeakers.

System Applications

• Touring, installed PA for clubs, A/V, theatre, broadcast, Houses of Worship, etc. High-quality stage monitoring for cabarets A/V, theatre, broadcast, etc.
• Fill-in system for use with larger NEXO PS/Alpha systems, or any application needing exceptional side, down and near-field augmentation.

Specification

LS600 Product Features

• Components: LF 1 x 15" (38cm) long excursion Neodymium 8Ω driver.
• Height x Width x Depth 435mm x 688mm x 528 mm (17.12" x 27.09" x 20.79").
• Weight 30 kg (66 Lbs) net.
• Connectors 2 x NL4MP SPEAKON 4 pole.
• Construction Baltic Birch Ply & textured, polyurethane black coating.
• Fittings Handles 2 Metal recessed pockets.
• Flying Points One plate connecting with external accessories.
• Stand fittings Internal Steel Stand Fitting on Top (35mm, 1 3/8") allows pole mounting for 1 PS10-R2.

System Specifications LS600 with PS10 TDController-R2

• Frequency Response [a] 40 Hz - 110 Hz ±3dB.
• Usable Range @-6dB [a] 38 Hz - 120 Hz.
• Sensitivity 1W @ 1m [b] 101 dB SPL Nominal.
• Nominal Peak SPL @ 1m [b] 135 to 138 dB Peak.
• Crossover Frequencies 120 Hz Active through PS10 TD Controller-R2.
• Nominal Impedance 8 Ohms.
• Recommended Amplifiers 1000 to 2000 Watts into 4 Ohms.

System Operation

• Electronic Controller The LS600 Subwoofer must be used with a Nexo Controller (PS10TD -R2, NX242, or NXAMPS). Use without a properly connected Controller will result in poor sound quality and may damage the components.
• Sub-bass The LS600 Subwoofer provides optional VLF extension for PS10R2 Loudspeakers. Active two-way operation with the PS10-R2 is included in the PS10TD-R2, NX242 or NXAMPS. One LS600 matches 2 x PS10-R2, additional LS600 may be used for enhanced effect.
• Speaker Cables The PS10R2 is wired 2- & 2+ on Speakon connectors, LS600 on 1- & 1+. Loop through Speakons are present on both products. Single identical cables can thus be used to loop through combinations of up to 2 x PS10R2 & 1 x LS600 in no particular order. As part of a policy of continual improvement, NEXO reserves the right to change specifications without notice

£572.37 (£672.53 Including VAT at 17.5%)

Nexo PS10 TDController-R2, The PS10 TDController-R2 is an advanced analogue processor that allows the PS10-R2 Loudspeaker and optional LS600 Subwoofer to achieve exceptional performance from such compact packages. The PS10 TDController-R2 provides crossover, sensed amplifier control and system equalisation optimised for the PS10-R2 and LS600. One PS10 TDController-R2 has two inputs and three outputs, L, R and summed sub out, minimising installation cost and complexity.

Like all NEXO processors, the PS10 TDController-R2 provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalisers (VCEQs), reducing levels only at frequencies when and where necessary.

Features

• Precision circuits engineered for the PS10-R2/LS600 systems permit increased sound pressure and operational reliability.
• Servo-controlled VCEQs provide precise dynamic control without spectral imbalance.
• Two inputs and three outputs enable a single PS10 TDController-R2 to manage multiple PS10-R2 and LS600 products.
• Comprehensive indicators and controls.

Specification

PS10 TDController-R2 Product Features

• Audio Inputs Two L&R Audio inputs. Electronically balanced, 50KOhm. Two XLR-3F connectors.
• Sense Inputs
  • Three Amplifier Sense Inputs (PS10-R2 L&R, LS600. 150 kOhm. 6 Pole Removable Strip Terminal).
  • Passive Mode, PS15-R2 L&R, RS15. Active Mode, PS15-2 LF and HF, RS15.
• Audio Outputs Two L&R PS10-R2 audio outputs. Electronically balanced, 50 Ohm. Two XLR-3M.
• One mono (L+R) LS600 audio output. Electronically balanced, 50 Ohm. One XLR-3M.
• Controls
  • Std/Max Protection Trimmer. Gain switch (back panel), 3 positions for Amps with Gain : 26 / 32 / 38 dB.
  • Sub On switch & Sub Gain Control.
• Indicators Speaker Protect LEDs. Amp Sense & Peak LEDs.
• Dimensions 1U 19" Rack. 190mm (7.5") Depth.
• Weight 2.9kg (6.6 lbs) net.

System Specifications PS10 TDController-R2

• Input Level +28dBm max into 600 Ohms.
• Output Level +20dBm Max. +19dBm Max on 1kOhm.
• Noise -88 dBm (22 Hz - 22 kHz, Unweighted).
• THD+N < 0.03% Typ. 0.05 Max for +18dBm Output.
• Power Supply 110/220 Volts (internal wiring), 50/60Hz. Earth-Lift (back panel).

System Operation

• Applicable Products The PS10 TDController-R2 is precisely matched to the PS10-R2 & RS15 cabinets and includes sophisticated protection systems. Use of either product without a properly-connected Controller will result in poor sound quality and may damage the components.

£1,854.28 (£2,178.78 Including VAT at 17.5%)

Nexo NX242 Digital TD Controller, NEXO’s NX242 TDcontroller is an advanced, proprietary digital processor that maintains exceptional performance and reliability in Geo, Alpha and PS loudspeaker systems and associated Sub-Basses. The NX242 provides crossover, sensed-amplifier control and system alignment acoustically matched to each NEXO component.

The NX242’s complex software algorithms integrate this calibrated data with sensed-voltage measurements, while analogue I/O functions share rear panel space with digital Audio Distribution and System Control over Standard Ethernet via EtherSound™ connection using the NXtension-ES4 Expander Board.

The NX242 supports all Nexo loudspeaker systems including:

• PS8, LS400

• PS10, LS500

• PS15, PS15Bass, LS1200

• Alpha EM, Alpha EF, B1-18

• Alpha M3, M8, B1, S2

• GeoT4805, GeoT2815

• GeoS805 GeoS830

• CD12 CD18

Features

• Precision circuits engineered for NEXO loudspeakers permit increased sound pressure and operational reliability.

• Flexible loudspeaker management for all NEXO loudspeaker systems, providing crossover, driver protection and system alignment.

• User-configurable inter-channel gain, delay and array EQ.

• Low and High-pass filters optimised to work in conjunction with overall system response.

• High-quality audio performance from 24bit data with 48bit accumulator; 100MIPS.

• 2x audio inputs, 4x audio outputs and 4 sense inputs enable a single NX242 to easily manage multiple NEXO cabinets across each product range.

• Comprehensive 16x2 character backlit LCD display, indicators and controls.

• Optional Remote Control, additional 100MIPS DSP and memory resources and link to the EtherSound Network (4in/4out) via the NXtension-ES4 expander Board.

• 4x NX242’s processed (digital) audio outputs to 64x uncompressed channels of 24bit/48kHz of audio transmission over Ethernet.

• Updateable Flash EPROM (Firmware) Upgrades.

• Remote Control software is WIN2000/XP OS compliant.

• Optional remote Control on WINCAI protocol, additional 100MIPS & memory resources.

The EtherSound interface for the NEXO NXtension-ES4 for NX242 TDcontroller provides 4x digital inputs and outputs (enabled for NEXO protocol compliant EtherSound amplifier) with audio digital distribution over Ethernet and ultimate low propagation delay allowing its use for the most demanding live audio applications.

NXtension-ES4 also enables network remote installation survey, thanks to its native integrated networked status report capability.

NXtension Key Features

• Doubles DSP-ES resources & Setup Memory of the NX242 TDcontrollers.

• Remote Control potentials via WLAN and Internet, 100% Ethernet and TCP/IP compatible.

• NX242 TDcontroller full Remote Control including Input/Output meters & protection monitoring.

• 4x Digital audio inputs from 64x uncompressed audio channels at 24bit/48kHz over Ethernet.

• 4x Digital NX242’s processed audio outputs to 64x uncompressed channels of 24bit/48kHz of audio transmission over Ethernet.

NX242-Specific Functions (when equipped with the NXtension board)

• Controls unlimited numbers of NX242 and other EtherSound compliant devices via the

• EtherSound Network.

• Enables NEXO-compliant ES-ready amplifiers.

• Controls all NX242 TDcontroller functions

• Advanced Patching operation

• Provides Group operation

• Provides hardware security lock (via NX242)

• Provides protection monitoring (coming soon)

Specification

• Output Level +28dBu Max into 600Ω.
• Dynamic Range All Channels = 110dB.
• THD+N Output Typ 0.005% @ 1000Hz @ 27dBu.
• Latency Time 2.2ms flat set-up
• Output Level 110-220V, 50-60Hz continuous operation (Operating range 90-264V)
• Audio Inputs 2x L&R Heavy Duty Audio inputs, 24bit converters; Electronically balanced and floating, 20kΩ. CMMR=80dB. 2x XLR 3 connectors.
• Sense Inputs
  • 4x Amplifier Sense-Inputs, 18bit converters; Floating 150kΩ.
  • 8-Pole Removable Strip Terminal.
• Audio Outputs
  • 4x audio outputs, 24bit converters, Electronically balanced, 50Ω.
  • 3x XLR-3M connectors.
• Processing 24bit data with 48bit accumulator. 100MIPS.
• Front panel Menu A and Menu B buttons. 16 x 2 character backlit LCD Display. Select Wheel and Enter Button; Four MUTE/SOLO Buttons.
• Indicators
  • 4x Speaker Protect yellow LEDs. 4x green Amp Sense LEDs. 4x red Peak LEDs.
  • 4x red Mute LEDs; 2x red LEDs; Input CLIP and DSP CLIP.
• Rear panel
  • On/Off Mains switch; mains IEC socket; RS232 serial communications connector;
  • Expansion slot for processor extension card;
• Flash/EPROM Software upgrades and new cabinet set-ups are available from nexo-sa.com.
• Dimensions 1RU(19in) Width, 230mm(9in) Depth
• Weight 3.8kg(8.8lbs) net

Sample User Control Specification

• System Selection Allows control of all NEXO ranges.
• System Set-up
  • Within the selected range, allows the cabinet to be set for passive or active mode, aux, mono or stereo subs, wedge or FOH operations depending on system selected.
  • Up to 80x factory pre-sets.
• Protection
  • Peak Limiter, Displacement and Temperature protection on every channel;
  • Physio control of the Protection limiter & compressors Soft Clip
  • Automatic tracking of amplifier clip point.
• Delay Up to 150m(465ft.) of delay in 10cm(.4in ) steps; on Sub channel, Main channels or Sub + Main linked.
• Input Sensitivity Level From 6dB to +12dB in 3dB steps.
• Output Level Global and inter-channel gain 6dB in 0.5dB steps.
• Amplifier Gain Reading Allows amplifier gain checking with program material.
• Mute/Solo Changes front panel buttons from Channel Mute to Solo.
• Save/Recall
  • Set-up Stores up to 10 user set-ups;
  • On- the-fly recall, without mute or glitches for instant comparison.
• Array EQ LF or HF shelving filter to compensate ground or stacking effects, +/-6dB
• Security Mode Password protected in Read-Only Mode.

£50.91 (£59.82 Including VAT at 17.5%)

Nexo Rails / Fly Kit for one PS10, Rails/Fly kit to be used with one Nexo PS10 Speaker.

£42.73 (£50.21 Including VAT at 17.5%)

Nexo U Bracket for PS8/PS10, U Brakcet to be used with the Nexo PS8 and Nexo PS10.

£61.82 (£72.64 Including VAT at 17.5%)

Nexo U Bracket + Mast for PS8/PS10, U Bracket and Mast to be used with the Nexo PS8 and Nexo PS10 Speakers.

£26.36 (£30.97 Including VAT at 17.5%)

Nexo Mast for PS8 / PS10 / PS15, Nexo Mast to be used with the Nexo PS8, PS10 and PS15 Speakers.

£54.55 (£64.10 Including VAT at 17.5%)

Nexo VNI-ABRK GEO S1210/1230, PS10/15 R2 Fixed Installation A Bracket.

£337.27 (£396.29 Including VAT at 17.5%)

Nexo PS10 Flying Cradle, Cradle used for flying Nexo PS10 Speakers.

£16.36 (£19.22 Including VAT at 17.5%)

Nexo Flying Anchor Plates for PS10, Anchor Plates to be used with the Nexo PS10 Speaker.

£153.64 (£180.53 Including VAT at 17.5%)

Nexo PS10/PS10 R2 TouRing Craddle, Nexo TouRig Craddle to be used with the Nexo PS10/PS10 R2.