£1,658.72 (£1,990.46 Including VAT at 20%)

Nexo PS15-R2 Loudspeaker, A high power system capable of producing 136dB Peak SPL, the new PS15-R2 Loudspeaker can be safely driven with up to 2000 Watts of amplifier power. Controlled by the new, dedicated PS 15 TDController-R2, or the NXAMP Powered Controller, the PS15-R2 achieves high SPLs and wide bandwidth performance, despite being only half the weight and volume of common trapezoidal loudspeaker systems.

Along with the flexible coverage patterns enabled by NEXO’s proprietary constant directivity asymmetrical dispersion horn, the architecture and weight balance of the PS15-R2 are designed to provide both uncompromised PA and stage monitor performance from a single speaker.

Left and Right versions of the PS15-R2 have been developed to provide a true stereo image – particularly important for wedge applications.

The 2-way passive 8Ω design uses a single amplifier channel to deliver bi-amped performance, reducing system cost, size and complexity, while the new cabinet design incorporates a pole mount and a new hardware adapter compatible with a vast array of touring and fixed installation accessories.

Features

• High-power system (136dB Peak SPL @ 1m) with 15in LF and 2in HF drivers.
• Rotatable asymmetrical horn and unique cabinet architecture ensure versatility; user adaptable for both PA and stage monitoring applications.
• Two-way, switchable passive or active design for precise performance-matching to user requirements.
• Sophisticated control electronics ensure reliable, linear operation.
• Supported with a full range of mounting and flying accessories.

System Applications

• High-power mid-sized touring, installed PA for clubs, A/V, theatre, Houses of Worship, broadcast, etc.
• High-quality, extremely powerful stage monitoring for A/V, theatre, cabarets, broadcast, etc.
• Fill-in system for any PA requiring side, down and near-field augmentation.

Specification

PS15-R2 Loudspeaker Product Features

• Components
  • LF 1 x 15" (38 cm) long excursion Neodymium 8Ω driver.
  • HF 1 x 2" throat, 3" Titanium diaphragm compression driver + Low Distortion, Constant Directivity Asymmetrical Dispersion Horn.
• Height x Width x Depth 675 x 434 x 368 mm (26.57" x 17.08" x 14.48").
• Weight 28 kg (62 lbs).
• Speakon Connectors 2 x 4 pole (Passive In & Loop Thru) + 1 x 4 pole (Active In).
• Construction Baltic Birch Ply finished with structured black coating.
• Fittings Handles 2 metal recessed pockets.
• Front Finish Moulded dark grey metal grille.
• Flying Points Two plate connecting with external accessories.
• Stand fittings Built in steel stand fitting (35mm / 1 3/8").

System Specifications PS15-R2 with PS15 TDController-R2

• Frequency Response [a] 50 Hz - 18 kHz ±3 dB.
• Usable Range @-6dB [a] 47 Hz - 18 kHz.
• Sensitivity 1W @ 1m [b] 102 dB SPL Nominal / 99 dB SPL Wideband.
• Nominal Peak SPL @ 1m [b] 133 to 136 dB Peak.
• HF Dispersion [c] 50° to 100° Horizontal x 55° Vertical Rotatable Horn, 4 positions.
• Directivity : Q & DI [c] Q : 16 Nominal / DI : 12 dB Nominal ( f > 1.5 kHz ).
• Crossover Frequencies 1.1 kHz Passive or Active (internally switchable).
• Nominal Impedance Passive 8Ω or Active LF 8Ω, HF 16Ω.
• Recommended Amplifiers
  • Passive 1000 to 2000 W 8Ω. Active LF 1000 to 2000 W 8Ω / HF 250 to 500 W 16Ω.
  • Important: Active mode only available on NXAMP.

System Operations

• Electronic Controller The PS15TD Controller-R2 is precisely matched to the PS15-R2 & RS15 cabinets and includes protections. Using PS15-R2 & RS15 without a properly connected PS15 TDController-R2 will result in poor sound quality and can damage the components.
• Dispersion configuration After dismounting the front grille from its fixings, the HF Horn can be rotated in 4 positions for dispersion configuration.
• Sub-bass The PS15-R2 can be used without optional RS15 Sub-bass. Active two-way operation with RS15 is included in the PS15 TDController-R2. One RS15 matches 2 x PS15-R2, additional RS15 may be used for enhanced LF capability.
• Speaker Cables PS15R2 are wired 2-/2+ on Input Speakons in Passive Mode. PS1R25 are wired LF 1-/1+ & HF 2-/2° on Input Speakons in Active Mode. Please refer to RS15 User Manual for RS15 for RS15 connection.

£592.98 (£711.58 Including VAT at 20%)

Nexo PS15 TDcontroller-R2, The PS15 TDController-R2is an advanced analogue processor that allows the PS15-R2 Loudspeaker and optional RS15 Subwoofer to achieve exceptional performance from such compact packages. The PS15 TDController-R2 provides crossover, sensed amplifier control and system equalisation optimised for the PS15-R2 and RS15.

The PS15 TDController-R2 also features user-selectable passive or active (bi-amp) operation of the PS15-R2 Loudspeaker. One PS15 TDController-R2 has two inputs and three outputs, including summed sub out, minimising installation cost and complexity.

Like all NEXO processors, the PS15 TDController-R2 provides precision dynamic, voice coil temperature and diaphragm displacement protection through the use of selective Voltage Controlled Equalisers (VCEQs), reducing levels only at frequencies when and where necessary.

Features

• Precision circuits engineered for the PS15-R2/RS15 systems permit increased sound pressure and operational reliability.
• Servo controlled VCEQs provide precise dynamic control without spectral imbalance.
• Two inputs and three outputs enable a single PS15 TDController-R2 to manage multiple PS15-R2 and RS15 products.
• User configurable for passive or active (bi-amp) operation of the PS15-R2 Loudspeaker.
• Comprehensive indicators and controls.

PS15 TDController-R2 Product Features

• Audio Inputs Two L&R Audio inputs. Electronically balanced, 50KOhm. Two XLR-3F connectors.
• Sense Inputs
  • Three Amplifier Sense Inputs, 180 kOhm. 6 Pole Removable Strip Terminal.
  • Passive Mode, PS15-R2 L&R, RS15. Active Mode, PS15-2 LF and HF, RS15.
• Audio Outputs
  • Three audio outputs. Electronically balanced, 50 Ohm. Three XLR-3M connectors.
  • Passive Mode, two PS15-R2 L&R, one Mono (L+R) RS15. Active Mode, one PS15-R2 LF, one PS15-R2 HF, one Mono (L+R) RS15.
• Controls Front panel: Overlap/Crossover switch, Two Bass EQ trimmers (+/- 3 dB), Three Peak Limiter Adjust trimmers. Three Gain trimmers (+/- 6dB). Back panel: Gain switch (back panel), 3 positions for Amps with Gain : -6 / 0 / +6 dB. Internal: Active/Passive Mode switch. Three Protection trimmers.
• Indicators Speaker Protect LEDs. Amp Sense & Peak LEDs. Active Mode LED. Power ON LED.
• Dimensions 1U 19" Rack. 190mm (7.5") Depth.
• Weight 2.9kg (6.6 lbs) net.

System Specifications PS15 TDController-R2

• Input Level +28dBm max into 600 Ohms.
• Output Level +22dBm.
• Noise -88 dBm (22 Hz - 22 kHz, Unweighted).
• THD+N < 0.03% Typ. 0.05 Max for +18dBm Output.
• Power Supply 110/220 Volts (External Rear Panel Switch), 50/60Hz. Earth-Lift (back panel).

System Operation

• Applicable Products The PS15 TDController-R2 is precisely matched to the PS15-R2 & RS15 cabinets and includes sophisticated protection systems. Use of either product without a properly-connected Controller will result in poor sound quality and may damage the components.
• Sub-bass Active two-way operation of the PS15 Loudspeaker in passive mode or three-way operation in active mode with the RS15 Subwoofer is included in the PS15TDController-R2.

£1,879.82 (£2,255.78 Including VAT at 20%)

Nexo NX242 Digital TD Controller, NEXO’s NX242 TDcontroller is an advanced, proprietary digital processor that maintains exceptional performance and reliability in Geo, Alpha and PS loudspeaker systems and associated Sub-Basses. The NX242 provides crossover, sensed-amplifier control and system alignment acoustically matched to each NEXO component.

The NX242’s complex software algorithms integrate this calibrated data with sensed-voltage measurements, while analogue I/O functions share rear panel space with digital Audio Distribution and System Control over Standard Ethernet via EtherSound™ connection using the NXtension-ES4 Expander Board.

The NX242 supports all Nexo loudspeaker systems including:

• PS8, LS400

• PS10, LS500

• PS15, PS15Bass, LS1200

• Alpha EM, Alpha EF, B1-18

• Alpha M3, M8, B1, S2

• GeoT4805, GeoT2815

• GeoS805 GeoS830

• CD12 CD18

Features

• Precision circuits engineered for NEXO loudspeakers permit increased sound pressure and operational reliability.

• Flexible loudspeaker management for all NEXO loudspeaker systems, providing crossover, driver protection and system alignment.

• User-configurable inter-channel gain, delay and array EQ.

• Low and High-pass filters optimised to work in conjunction with overall system response.

• High-quality audio performance from 24bit data with 48bit accumulator; 100MIPS.

• 2x audio inputs, 4x audio outputs and 4 sense inputs enable a single NX242 to easily manage multiple NEXO cabinets across each product range.

• Comprehensive 16x2 character backlit LCD display, indicators and controls.

• Optional Remote Control, additional 100MIPS DSP and memory resources and link to the EtherSound Network (4in/4out) via the NXtension-ES4 expander Board.

• 4x NX242’s processed (digital) audio outputs to 64x uncompressed channels of 24bit/48kHz of audio transmission over Ethernet.

• Updateable Flash EPROM (Firmware) Upgrades.

• Remote Control software is WIN2000/XP OS compliant.

• Optional remote Control on WINCAI protocol, additional 100MIPS & memory resources.

The EtherSound interface for the NEXO NXtension-ES4 for NX242 TDcontroller provides 4x digital inputs and outputs (enabled for NEXO protocol compliant EtherSound amplifier) with audio digital distribution over Ethernet and ultimate low propagation delay allowing its use for the most demanding live audio applications.

NXtension-ES4 also enables network remote installation survey, thanks to its native integrated networked status report capability.

NXtension Key Features

• Doubles DSP-ES resources & Setup Memory of the NX242 TDcontrollers.

• Remote Control potentials via WLAN and Internet, 100% Ethernet and TCP/IP compatible.

• NX242 TDcontroller full Remote Control including Input/Output meters & protection monitoring.

• 4x Digital audio inputs from 64x uncompressed audio channels at 24bit/48kHz over Ethernet.

• 4x Digital NX242’s processed audio outputs to 64x uncompressed channels of 24bit/48kHz of audio transmission over Ethernet.

NX242-Specific Functions (when equipped with the NXtension board)

• Controls unlimited numbers of NX242 and other EtherSound compliant devices via the

• EtherSound Network.

• Enables NEXO-compliant ES-ready amplifiers.

• Controls all NX242 TDcontroller functions

• Advanced Patching operation

• Provides Group operation

• Provides hardware security lock (via NX242)

• Provides protection monitoring (coming soon)

Specification

• Output Level +28dBu Max into 600Ω.
• Dynamic Range All Channels = 110dB.
• THD+N Output Typ 0.005% @ 1000Hz @ 27dBu.
• Latency Time 2.2ms flat set-up
• Output Level 110-220V, 50-60Hz continuous operation (Operating range 90-264V)
• Audio Inputs 2x L&R Heavy Duty Audio inputs, 24bit converters; Electronically balanced and floating, 20kΩ. CMMR=80dB. 2x XLR 3 connectors.
• Sense Inputs
  • 4x Amplifier Sense-Inputs, 18bit converters; Floating 150kΩ.
  • 8-Pole Removable Strip Terminal.
• Audio Outputs
  • 4x audio outputs, 24bit converters, Electronically balanced, 50Ω.
  • 3x XLR-3M connectors.
• Processing 24bit data with 48bit accumulator. 100MIPS.
• Front panel Menu A and Menu B buttons. 16 x 2 character backlit LCD Display. Select Wheel and Enter Button; Four MUTE/SOLO Buttons.
• Indicators
  • 4x Speaker Protect yellow LEDs. 4x green Amp Sense LEDs. 4x red Peak LEDs.
  • 4x red Mute LEDs; 2x red LEDs; Input CLIP and DSP CLIP.
• Rear panel
  • On/Off Mains switch; mains IEC socket; RS232 serial communications connector;
  • Expansion slot for processor extension card;
• Flash/EPROM Software upgrades and new cabinet set-ups are available from nexo-sa.com.
• Dimensions 1RU(19in) Width, 230mm(9in) Depth
• Weight 3.8kg(8.8lbs) net

Sample User Control Specification

• System Selection Allows control of all NEXO ranges.
• System Set-up
  • Within the selected range, allows the cabinet to be set for passive or active mode, aux, mono or stereo subs, wedge or FOH operations depending on system selected.
  • Up to 80x factory pre-sets.
• Protection
  • Peak Limiter, Displacement and Temperature protection on every channel;
  • Physio control of the Protection limiter & compressors Soft Clip
  • Automatic tracking of amplifier clip point.
• Delay Up to 150m(465ft.) of delay in 10cm(.4in ) steps; on Sub channel, Main channels or Sub + Main linked.
• Input Sensitivity Level From 6dB to +12dB in 3dB steps.
• Output Level Global and inter-channel gain 6dB in 0.5dB steps.
• Amplifier Gain Reading Allows amplifier gain checking with program material.
• Mute/Solo Changes front panel buttons from Channel Mute to Solo.
• Save/Recall
  • Set-up Stores up to 10 user set-ups;
  • On- the-fly recall, without mute or glitches for instant comparison.
• Array EQ LF or HF shelving filter to compensate ground or stacking effects, +/-6dB
• Security Mode Password protected in Read-Only Mode.

£55.26 (£66.31 Including VAT at 20%)

Nexo Rails / Fly Kit for one PS15, Rails/fly kit to be used with one Nexo PS15 Speake.

£339.47 (£407.36 Including VAT at 20%)

Nexo PS15 Flying Cradle, Cradle used for flying Nexo PS15 speakers.

£200.00 (£240.00 Including VAT at 20%)

Nexo PS15/PS15 R2 TouRing Craddle, Nexo TouRig Craddle to be used with the Nexo PS15/PS15 R2.

£27.19 (£32.63 Including VAT at 20%)

Nexo Mast for PS8 / PS10 / PS15, Nexo Mast to be used with the Nexo PS8, PS10 and PS15 Speakers.

£147.37 (£176.84 Including VAT at 20%)

Nexo VNI-UBRK12 U Bracket for PS15R2

£58.77 (£70.52 Including VAT at 20%)

Nexo VNI-LBRK L Bracket for cable suspension for PS10R2 and PS15R2

£52.63 (£63.16 Including VAT at 20%)

Nexo VNI-ABRK Bracket for ceiling suspension for PS10R2 and PS15R2

£169.30 (£203.16 Including VAT at 20%)

Nexo VNI-WS15 Wall suspension system for PS15R2

£200.00 (£240.00 Including VAT at 20%)

Nexo VNT-SSBRK15 "U" bracket for horizontal suspension of PS15R2

£88.60 (£106.32 Including VAT at 20%)

Nexo VNT-TTC Flying Rail for vertical suspension of PS

£299.81 (£359.77 Including VAT at 20%)

Nexo PS15 / PS15 R2 Speaker Case - Holds a Pair, The Nexo PS15 / PS15 R2 Speaker Case has been designed and built around the equipment to ensure maximum protection while keeping to the minimum size, which means the case is no bigger than it needs to be.

Specification

• Full ATA touring spec flight case.
• 9mm Hexa Board
• Heavy duty fittings.
• Fully foam lined to Spec
• Houses 2 off Speakers.
• Lift off lid.
• 4" castors with 2 being braked