NJD Datamoon Touring kit. Includes two Data moons, one hand held controller, one RJ11 lead, one 5 pin dmx lead, two mains leads & Flight case. DATAMOON INTELLIGENT FLOWER EFFECT. These high brightness effects are fan cooled 250 Watt Halogen flower effects fitted with, high reliability, long life, STEPPER MOTORS, 7 dichroic colours + white, 7 gobos, strobe effect, variable rotation speed, forward and reverse, sound activation and a lamp life economy switch. 

The DATAMOON will independently run through a comprehensive series of pre-programmed patterns and effects activated by its own built in microphone and will synchronise with any number of other DATAMOON's by simply linking them with a DMX lead. Alternatively a dedicated NJD controller (Handheld controller, IQ-MX80, IQ-MX60 or IQ-MX40 Mk2 or S- pedal) can synchronise multiples of NJD intelligent lights and provide manual control and a multitude of pre-programmed and user programmed effects and sequences. The DATAMOON uses standard DMX512 or 0-10 Volt analogue control for all of its operating instructions and so makes it ideal for use with the NJD Merlin DMX Lighting desk or with any industry standard lighting controller with DMX or 0 - 10V facilities. Up to 32 DATAMOONs may be addressed independently.

Datamoon Specification:

• Dichroic colours : 7 + White (20 beams)
• Gobos : 7
• Image size: 3.5º (62mm at 1 meter)
• Pattern size: 23º (400mm at 1meter)
• Control protocol : DMX512
• Sound response : Built in microphone, auto-level
• Lamp : A1/259 24V 250W (supplied)
• Power requirements : 230V AC 50/60 Hz 300VA
• Dimensions : 275mm x 305mm x 160mm
• Weight : 8kg 
• Recommended connecting cable: Screened twisted pair 120 Ohms

Kit contents:

• 2 x Datamoons
• 1 x Handheld controller fitted with RJ11 socket
• 1 x RJ11 male to male lead
• 1 x 5 pin Male to Female XLR 
• 2 x IEC mains leads
• Power requirements : 230V AC 50/60 Hz 600VA
• Dimensions of Flight case : 470mm x 495mm x 395mm
• Weight (total kit)  : 26.5kg 

Lighting Stand with T bar:  A fully adjustable with the ability to accept a variety of accessories for different applications. The stand is manufactured from epoxy coated black steel. The Stand also features safety locking pins on each stage so it can not slip. Comes complete with cross bar with fixed Spigot - for a multiple lights. Accepts a 28mm spigot should you wish to use  a single lighting effect (not supplied please order separately).

SPECIFICATIONS:
28mm Spigot socket 
Max, evenly distributed load: 40Kgs
4 x M10 Nuts & Bolts
Minimum height: 1900mm
Maximum height: 3200mm
Folded length of stand: 1450mm x 200mm  x 200mm