The MiniCity 250 is a CYM flood projector, which has been created for static architectural purpose, however it is extremely versatile and can be used also for traditional applications. The optic system, covered by patent, uses of a simple but efficient CYM colour changer with dichroic filters and allows a progressive and gradual colouring of the entire light beam, which can therefore continuously reach endless shades and colour saturations. Thespot, very small and compact, can be directly installed to the ground or on a wall like common white beam projectors. The high protection against dust and liquid is very high, IP 66, and guarantees the perfect functioning also in unfavorable weather conditions.

The MiniCity uses a 250W MSD and is particularly suggested for an economical use instead of traditional spots to light up buildings, exhibitions or for artistic needs. The lamp is manufactured with UV-block technique, which stops the ultra-violet rays by making this lamp one of the safest and mostly appreciated ones for indoor lighting or commercial areas. It is therefore useless to point out that with a price that is slightly more expensive than a PAR one has the possibility to use an intelligent and potentially superior colour changer.

The already stored programs can make the MiniCity work, singularly or synchronized with other fixtures, also without DMX control: the user can obtain the required scenery by choosing the proper stored program. The use of our DMX recorder EASY CONTROL can be very helpful because it allows you to store a series of programs that can be designed on purpose for any specific application. For professional uses such as special events, stages or theatres the MiniCity can be driven in DMX and all its potentialities will be better exploited.

• LAMP: MSD 250/2 (luminous flux 18000 lumen), 2000 hours lamp life, 8500 K colour temperature
• BEAM ANGLE Varying (controlled by stepper motors)
• COLOUR SYSTEM: Full CYM colour mixing unlimited variety of colours and shades, High resolution stepper motor, Colour crossfades can be programmed at four different speeds or in real time
• OPTIC: New concept optical system
• CONTROL INPUT SYSTEM: USITT DMX 512 protocol, Opt isolated input, Stand-alone control: auto mode function-master/slave, 28 stored programs
• IP RATE: IP66
• POWER SUPPLY: 230VAC, 50 to 60Hz
• DMX CHANNELS: Ch1 Motor speed, Ch2 Cyan (continuously variable), Ch3 Yellow (continuously variable), Ch4 Magenta (continuously variable), Ch5 Dimmer, Ch6 Beam angle, Ch7 Local reset/ Lamp off
• DIMENSION WxDxH 440x220x580mm
  
  
   
  Enter e-mail address to tell a friend