NJD Spectre complete lighting system:

• Two NJD SPECTRE COLOUR MIXING FLOODLIGHTs inc Lamps

• SFC 1 Hand-held remote control

• One 5m RJ12 connecting lead, One 10m 5 pin XLR Male to Female lead

• Deadcated Flight case designed to hold the above, made from lightweight but strong fibre board, Quick release webbing straps & a removable lid

For suitable portable stands please see our section on Equipment Stands

NJD SPECTRE COLOUR MIXING FLOODLIGHT, An amazing concept in stage lighting, the SPECTRE provides the user with an almost limitless choice of colours by mixing three 500 Watt lamps, one red, one green and one blue through dichroic filters. The internal microprocessor interpret the users requirements and calculate what percentage of each colour is needed to create the colour wash desired.
From vivid prime colours to gentle pastels the spectre can create them all and with no moving colour wheels or scrolls the colour change viewed by the audience is absolutely seamless.

Control is simplicity itself via. either DMX, 0-10 Volts or MIDI, all that is required is three channels. Channel one is a dimmer which controls the brightness from 0 - 100%. Channel two controls the colour selection, moving the slider through 0 -100% gently taking the colours through 12 colours and all intermediate shades. Channel three allows the operator to choose any pastel of a selected colour (e.g. If channel 2 in set to red then channel 3 will allow all pastels from solid red to a hint of pink).

Lighting Stand with T bar:  A fully adjustable with the ability to accept a variety of accessories for different applications. The stand is manufactured from epoxy coated black steel. The Stand also features safety locking pins on each stage so it can not slip. Comes complete with cross bar with fixed Spigot - for a multiple lights. Accepts a 28mm spigot should you wish to use  a single lighting effect (not supplied please order separately).

SPECIFICATIONS:
28mm Spigot socket 
Max, evenly distributed load: 40Kgs
4 x M10 Nuts & Bolts
Minimum height: 1900mm
Maximum height: 3200mm
Folded length of stand: 1450mm x 200mm  x 200mm

A1/244 240V 500W (GY9.5) 7389 LAMP

Spigot 28mm for use with lighting stands with a 28mm spigot socket. This allows you to fix a single light future to a lighting stand. Ideal for lightweight follow spots or Colour changes such as the NJD Spectra / Quartet's. (please note some fixtures only have a M10 hole - this may need to be filed out to M12 to use this)

SPECIFICATIONS:
28mm Spigot 
Max, evenly distributed load: 20Kgs
1 x M12 Stud bolt with M12 Locking knob and M12 Spacer

S-PEDAL,Foot Operated Lighting Controller

S-PEDAL

• Foot operated lighting controller
• Robust extruded aluminium case
• DMX output
• Sound Chaser
• Trigger from MIDI drum Track
• Flood in any colour 2 storable scenes including "Blackout"
• Can control up to 32 NJD ColourMixing Floodlights

S-PEDAL
TECHNICAL SPECIFICATION
Audio input sensitivity : 1.5V rms to 50V
Audio input impedance : 33k Ohms
Audio input connector : 6.35mm Mono Jack
Output connectors :5 pin XLR
Output : DMX512 : 1990    80 Channels
Power requirements : 12V DC 50mA
Power supply connector: 2.5mm DC power socket
Dimensions : 405mm x 201mm  x 58mm
Weight : 3.1kg

NOTE: POWER SUPPLY REQUIREMENTS
For NJD products fitted with 5 pin XLR sockets or the Mirage with terminal block connections, NO EXTERNAL POWER SUPPLY IS REQUIRED. For NJD products fitted with 3 pin XLR or Jack Socket connectors AN EXTERNAL 12V DC 50mA POWER SUPPLY IS REQUIRED (Not supplied)   SEE P006DN.

XLR DMX Cable, Digital signal cable: A range of digital AES-EBU, 100 ohm cables for DMX512 lighting and other digital signal applications where low signal distortion is required. Cables are black and wired with all circuits wired.