ANTARI SNOW MACHINE S100 mk2, Like the original S-100 snow machine, the Antari S-102 II is a powerful, high-pressure, large-output machine that produces abundant amounts of "snow".  Owing to the built-in blower, the effect can be spread over considerable distances. The hanging bracket allows the snow machine to be placed over a crowd or above a set to simulate falling snow. The durable motor is cradled on rubber cushions within the case allowing for high output and low vibration. The SC-2 remote control gives 100% control over both area coverage and volume of snow produced.  The S-100 II has DMX on board and can be controlled using 2 channels via any standard DMX controller, This light, portable machine is perfect for club effects, movie sets and stage settings so let it snow, let it snow, let it snow.

SPECIFICATIONS
Power: AC 230V/50Hz
Power Consumption: 600 W
Fuse: 250V/5A Slow Blow Type
Tank capacity: 5.0 litres
Output 140 ml / min.
Air Pressure: 30 psi
Dimensions 505 x 276 x 222 mm
Weight: 11 kg
SC-2 Remote Control Included, (on/off & volume control, 10 Meters of cable, plugable 4 pin XLR)
Yolk Included

The Snow 102 mk2, Snow effect machine uses a Foam fluid that under pressure will project around 7- 12 feet from the unit, so the higher the unit is, the further the throw.   The snow effect is small pieces of moist foam which looks like falling snow, However you will only get a small amount of settlement as the foam dissipates. The fluid is a form of detergent which is biodegradable and safe to use. (we can provide a COSH Data sheet on request) The fluid consumption can be set by the user - at max (heavy snow effect) you would use 5L in approximately 35 mins,  when set to half output (light snow) effect you should achieve nearer 60 mins. This is typically how we use the machines when used above shop windows - for late night shopping, Santa's grotto & lighting the lights type events.