Available in two versions the Nexo DTDAMP 4x1.3 and Nexo DTDAMP 4x0.7; both versions come with 4-channel and 1U rack-mounting. Road and Rack-Ready, the Nexo DTD Amp offers all the sensors and protection that are mandatory for a proffessional touring amplifier. Variable speed cooling system ensures a quiet and cool amplifier while the front to back cooling system ensures compatibility inside racks where both DTDAmp and Nexo's NXAmp are used together in larger installations.
The Nexo DTD Amp is ideal for both mobile or fixed installations of NEXO ID and PS Series systems. The Nexo DTDAMP partners with the touring and install versions of the DTD Controller to create a compact, light-weight, intelligent powering solution that’s easy to configure; ideal for bars, DJ's, small retal companies - those that require a compact and easy to use product tat has a high standard of sound quality. The fact that the unit cane be used without a computer will appeal to such users.
Two models of high-power, lightweight four channel amplifiers.
Perfect match for the NEXO speakers supported by the DTD Controller.
High-efficiency Switch Mode power supply and Amplifier channel design.
Channels can be independently bridged two by two.
Four Inputs on XLR connectors and four Outputs on SP-4 connectors.
Extensive protection (Mains over/undervoltage, temperature, DC outputs, current and voltage peak limiters, variable speed cooling system).
Number of channel: 4 x amplifiers channel, 2 by 2 bridgeable
Max. output voltage (no Load): 4 x 135 Volts
Max. output power (4 x 8 Ohms): 4 x 750 Watts
Max. output power (4 x 4 Ohms): 4 x 1300 Watts
Max. output power (2 brigde x 8 Ohms: 2 x 2600 watts
Frequency response: +/- 0.5 dB from 20 Hz to 20 kHz
Input impedance: 10 kOhms
Input sensitivity: +8 dBU
Nominal Gain: 32 dB
Dynamic Range (A-weighted): > 110 dB
THD+N: Typical 0.01%
Analog audio inputs: 4 x balanced analog inputs on XLR
Power outputs: 4 x SP4 outputs
Link switch: To use same XLR input for 2 x adjacent channels
Mains sockets: IEC C14 Inlet with secure lock
Switch and knobs: Mains On/Off switch and volume control knob per channel
View meters: 4 x LEDs (signal / -18 dB / -6 dB / Peak) per channel
Amplifier status: Amp Ready and Temperature indicator per channels pairs
Mains voltage: Factory set for 120 volts of 230 volts mains operation
Power consumption (Idle): 65 Watts
Power consumption 1/8 max. / 4 Ohms: 900 Watts
Power consumption 1/4 max. / 4 Ohms: 1800 Watts
Dimensions (W x H x D): 480 (W) x 44 (H) x 370 (D) mm, 19 inches / 1U
Weight: 7.5 kg
Operating temperature range: 0°C - 45 °C
CE conformity: 2006/95/CE (Low voltage) 2004/108/CE (EMC) 2002/95/CE (RoHS)
Electrical safety certification: CSA, CB, EN60065
EMC certification: EN55103-1 / EN55103-2 / FCC