Crown XLC21300 Power Amplifier for Cinema/Install, 2x 1300W @ 4 Ohms

Crown XLC21300 Power Amplifier for Cinema/Install Specifications

- Channels: 2
- Output power (@ 1 kHz):
  - 8Ω: 1000 watts x 2
  - 4Ω: 1300 watts x 2
  - 8Ω Bridged: 2,700 watts x 1
- Frequency response: (@ 1W, 20 Hz–20 kHz): +0 / -1 dB
- Signal-to-noise ratio: (REF. RATED POWER, 8Ω, 1 kHz): >100 dB
- THD: <0.5%, 20 Hz–20 kHz
- Damping factor (8Ω, 10 Hz–400 Hz): >200
- Intermodulation distortion: <0.35% (60 Hz and 7 kHz at 4:1 from full rated output to -30 dB)
- Crosstalk separation: >75 dB (below rated 8 Ω power at 1 kHz); >59 dB (below rated 8 Ω power at 20 kHz)
- Input impedance (nominal): 20kΩ balanced, 10kΩ unbalanced
- Voltage gain: 36 dB
- Load impedance: 4–8Ω per channel in stereo, 8Ω bridged
- Input connectors: 1x 6-pin Phoenix female, 1x HD-15 female
- Output connectors: 4-pin barrier strip
- Input modes: Dual, input Y
- Output modes: Stereo, bridged mono
- Input sensitivity (Full rated power @ 4Ω): 1.4V
- Led indicators: Power, signal, clip, bridged output and fault (Power LED = standby, normal operation and default)
- AC line voltage and frequency (±10%):
  - 120 VAC, ~60 Hz;
  - 220 VAC, ~50/60 Hz;
  - 230–240 VAC, ~50 Hz
- Dimensions (D x W x H): 366 x 482.6 x 88.9 mm
- Weight: 17.9 kg

Further Product Information Below