B&C 10MBX64 10-Inch Speaker Driver - 350W RMS, 16 Ohm, Spade Terminals

B&C 10MBX64 10-Inch Speaker Driver - 350W RMS, 16 Ohm, Spade Terminals

Ref: JP108450

B&C 10MBX64 10-Inch Speaker Driver - 350W RMS, 16 Ohm, Spade Terminals

The B&C 10MBX64 10-Inch Speaker Driver offers acoustic designers a new range of high efficiency, wide bandwidth alternatives that are not currently available in the B&C range. These full-featured transducers incorporate lightweight neodymium motors, inside/outside wound copper clad aluminum wire voice coils, weatherproof impregnated paper cones, and a symmetrical inductance profile. The MBX Series is especially well suited for two-way loudspeaker enclosures.


B&C 10MBX64 10-Inch Speaker Driver Features

- 700 W continuous program power capacity
- 64 mm (2.5 in) aluminium voice coil
- 65 - 6000 Hz response
- 100 dB sensitivity
- Neodymium inside slug magnet assembly
- Aluminium demodulating ring allows a very low distortion figure
- Ventilated voice coil gap for reduced power compression


B&C 10MBX64 10-Inch Speaker Driver Specifications

- Nominal Diameter: 250 mm (10.0 in)
- Nominal Impedance: 16 ?
- Minimum Impedance: 11.3 ?
- Nominal Power Handling: 350 W
- Continuous power handling: 700 W
- Sensitivity (1W/1m): 100.0 dB
- Frequency Range: 65 - 6000 Hz
- Voice Coil Diameter: 64 mm (2.5 in)
- Winding Material: Aluminium
- Former Material: Glass Fibre
- Winding Depth: 12 mm (0.47 in)
- Magnetic Gap Depth: 8.0 mm (0.31 in)
- Flux Density: 1.25 T

Design:
- Surround Shape: Double Roll
- Cone Shape: Radial
- Magnet Material: Neodymium Inside Slug
- Spider: Single
- Pole Design: T-Pole
- Woofer Cone Treatment: Waterproof Impregnated Cone
- Recommended Enclosure: 26.0 dm³ (0.92 ft³)
- Recommended Tuning: 65 Hz

Parameters:
- Resonance Frequency: 65 Hz
- Re: 10.2 ?
- Qes: 0.32
- Qms: 5.8
- Qts: 0.3
- Vas: 30.0 dm³ (1.06 ft³)
- Sd: 346.0 cm² (53.63 in²)
- ??: 3.0 %
- Xmax: ± 4.0 mm
- Xvar: ± 5.5 mm
- Mms: 30.0 g
- Bl: 20.5 Txm
- Le: 0.57 mH
- EBP: 203 Hz

Physical:
- Overall Diameter: 261 mm (10.28 in)
- Bolt Circle Diameter: 245 mm (9.65 in)
- Baffle Cutout Diameter: 230.0 mm (9.06 in)
- Depth: 125 mm (4.92 in)
- Flange and Gasket Thickness: 14 mm (0.55 in)
- Air Volume Occupied by Driver: 1.5 dm³ (0.05 ft³)
- Net Weight: 3.25 kg (7.17 lb)




For Product Information & Pricing please Click Here Contact us for more images if needed