ChamSys GeNetix 10Scene Wall Plate v2 (Pack of 2)

The ChamSys GeNetix 10Scene Wall Plate v2 features ten 10Scene trigger buttons, with dual colour LED status indication.

Connect 10Scene wall plates directly to the MagicQ/QuickQ Racks and DINs or to the GeNetix Gateway, GN5 or GN10 Nodes, where it can then integrate with any MagicQ or QuickQ system for remote Scene activation.

Each 10Scene Wall Plate can be individually ID'd allowing up to 50 zones when connected to MagicQ Systems, 10 when connected to QuickQ Systems and 1 with GeNetix Systems.

Supplied in a dual pack available for UK Backbox fits.

ChamSys GeNetix 10Scene Wall Plate v2 Features

- Uses standard Cat 5E cable for connectivity
- Connect direct to MagicQ/QuickQ Rack/DIN products or GeNetix Gateway, GN5 or GN10's no power injectors required
- Easy to daisy chain - up to ten 10Scene wallplates per chain
- Long distance - one 10Scene at 1000 metres or five 10Scenes in a chain at 300m
- Supplied in a dual pack containing 2 wall plates

ChamSys GeNetix 10Scene Wall Plate v2 Specifications

Hardware Specifications:
- 10Scene Buttons: 10
- Dual Colour Red/Blue Buttons: Yes
- Powered via 10Scene Protocol: Yes
- 10Scene Connector Type: 2 x RJ45 Sockets
- Max Number of 10Scene Wall Plates per Daisy
- Chain: 10

Software Specifications:
- Custom Wall Plate IDs: Yes
- Compatible with MagicQ / QuickQ Rack / DIN: Yes
- Compatible with GN5 / GN10 / GN10P / GN10R: Yes
- Compatible with GeNetix Gateway: Yes

Weights and Dimensions:
- Width: 86mm (3.4 inches)
- Depth: 30mm (1.2 inches)
- Height: 86mm (3.4 inches)
- Weight: 0.2kg (0.44 lb)

ChamSys GeNetix 10Scene Wall Plate v2 Supplied With

- 2x 10Scene to RJ45 Adapters
- 1x Quick Start Guide

Please Note: Images are representative only. Final product may vary.