Neutrik NO2-4FDW-A opticalCON Chassis Feedthrough Socket - Black

The Neutrik NO2-4FDW-A opticalCON Chassis Feedthrough Socket is a black chromium plated opticalCON chassis connector with 4 solder contacts and 1 LC-Duplex feedthrough socket. It is designed as a feedthrough connector, allowing a conventional LC-Duplex connector to be connected on the rear for simplified installation.

Built in a standard D size shell, the NO2-4FDW-A features an automatic sealing shutter with silicone gasket to help protect the optical connection from dust and dirt. The front side accepts either a rugged opticalCON connector or a standard LC connector, with Push-Pull locking for secure connection.

The connector provides IP65 ingress protection in mated condition when used in combination with SCDP-* and supports colour coding with SCDP-* according to ANSI/TIA-568.3-D standards.

Neutrik NO2-4FDW-A opticalCON Chassis Feedthrough Socket Features

- Suggested OEM equipment connector due to LC front compatibility
- Designed as feedthrough with automatic sealing shutter
- Shutter with silicone gasket protects optical connection from dust and dirt
- Accommodates standard LC connectors on the rear for simple installation
- Connection on the front side either by rugged opticalCON or standard LC connector
- The low cost of the chassis connector makes it a viable alternative to traditional connectors in fixed installations
- IP65 ingress protection in mated condition with SCDP-*
- Color coding with SCDP-* according to ANSI/TIA-568.3-D Standard:
  - Multimode - black
  - Single mode PC - blue
  - Single mode APC - green

Neutrik NO2-4FDW-A opticalCON Chassis Feedthrough Socket Specifications

Electrical:
- Contact resistance: < 7 mΩ
- Dielectric strength: 1,5 kVdc
- Insulation resistance: > 2 GΩ (initial)
- Rated current per contact: 6 A
- Rated voltage: < 50 V

Mechanical:
- Insertion force: < 45 N
- Withdrawal force: < 45 N
- Lifetime (typ.): 5000 mating cycles
- Locking force: 1000 N
- Locking device: Push-Pull
- Mounting direction: Front mounting
- Chassis shape: D

Material:
- Contacts: Bronze (CuSn6)
- Insert: Polyamide (PA 6, PBT 30 % GR, PBT 50 % GR)
- Shell: Zinc diecast (ZnAl4Cu1)
- Shell plating: Black chromium
- Split sleeve: ceramics

Environmental:
- Temperature range: -40 °C to +75 °C
- Protection class: IP65 in mated condition in combination with SCDP-*

Optical:
- Insertion loss: < 0.4 dB / connection
- Optical connector: LC-Duplex Feedthrough