Showtec LED Octostrip Set MKII RGB LED Strip with Controller, 8x RGB 0.5m

The Showtec LED Octostrip Set MKII RGB LED Strip with Controller is the successor of the popular Octostrip. It is a complete plug-and-play set; consisting of 8 LED strips, a controller and eight 5-metre long XLR extension cables. The new LED Octostrip MKII can control each strip’s 4 individual RGB sections, along with the corresponding dimmer and strobe settings. The controller supports Art-Net protocol, which facilitates the use of device while operating in the full RGB mode (192-Ch mode). It has updated colour presets and built-in colour flows for use of horizontal and vertical directions which are accessible via DMX (in 6-Ch, 8-Ch, 14-Ch, 24-Ch, 26-Ch, 50CH, 96-Ch, 112-Ch, 192-Ch, 208-Ch channel modes). Because of the exact same hardware design It is possible to combine the Octostrip MKI to the new Octostrip MKII in one stage. However, in such case, it is not advisable to operate the old and the new version of the device in Auto mode, as the built-in programs differ per version. The 6-Ch mode has the same DMX channel settings to control both sets in one setup.

Showtec LED Octostrip Set MKII RGB LED Strip with Controller Features

- 8x 50 cm strips with 4 RGB Sections
- 5m extension cables included
- DMX & Art-Net control

Showtec LED Octostrip Set MKII RGB LED Strip with Controller Specifications

Source:
- Light Source Type: LED
- Light Source Power: 25 W
- LED Colour Type: RGB

Dynamic Effects:
- Dimmer: 0-100 %
- Strobe: 0-20 Hz

Control and Programming:
- Control Mode: Auto, Built-in Program, DMX, Master Slave, Sound
- DMX Channels: 6, 8, 14, 24, 26, 50, 96, 112, 192, 208
- Protocols: Art-Net, DMX
- Display: LCD

Electrical Specifications and Connections:
- Power Supply: 100-240 V AC 50/60 Hz
- Power Consumpton: 90 W
- Power Connector In: Power Pro Blue
- Power Connector Out: Power Pro Grey
- DMX Connector: XLR 3P In/Out
- DMX Connector In: XLR 3P
- DMX Connector Out: XLR 3P
- Data Connector: etherCON In/Out
- Data Connector In: etherCON
- Data Connector Out: etherCON

Mechanical Specifications:
- Height: 500 mm
- Width: 30 mm
- Depth: 50 mm
- Controller Height: 92 mm
- Controller Width: 200 mm
- Controller Length: 315 mm
- Weight: 11.9 kg
- IP Rating: IP20 (indoor use only)
- Housing: Aluminium die-cast
- Colour: Black

Product Properties:
- Cooling: Convection
- Thread: M10

Rigging:
- Mounting Options: Clamp, Quick-Lock, Sliding Profile
- Safety Attachment: Yes

Thermal Specifications:
- Maximum Ambient Temperature: 40 °C (104 °F)

Showtec LED Octostrip Set MKII RGB LED Strip with Controller Supplied With

- 8x Octostrip 0.5m
- 1x Controller
- 1x Power Pro Cable
- 8x XLR 5P 5m