
Ref: JP115398
The Ecler HUB1408 14x8 Digital Zoner With DSP is a digital zone manager with 14 inputs and 8 outputs. It has the HANGAR embedded web-server application (control from standard web browser in Windows / MacOS, etc.) for its configuration; remote control from physical wall installation panels, call (paging) stations and applications for mobile devices (Android, iOS). Includes DSP with specific functions for both inputs and outputs. HUB Series offers multiple possibilities, being intuitive and easy to configure. From the least experienced user to the most expert, you can set up a professional audio installation in a matter of minutes (Plug and Play). It is the perfect solution for any type of sound that requires managing and controlling different zones.
Ecler HUB1408 14x8 Digital Zoner With DSP Features
- 14 inputs, 8 outputs digital zoner with integrated DSP
- Easy programming and control by embedded web application, HANGAR, and standard web browser
- Control from the front panel and user remote control by: eMCONTROL1 wall panels (up to 8) / eMPAGE paging consoles (up to 2) / Ecler pilot application, compatible with Android and iOS:control graphic panels set to user needs (pilot panels) / TP-NET protocol (RS-232 interface with DB9 connector)for control and integrating with third party systems
- Control available, by zone (output): selection of audiosource (input), volume adjustment and MUTE, 3 band tone adjustment and general volume
- Four priority levels, ducker/pager functions
- Available DSP: frequency shifter, link stereo, delay,crossover filters, 8-band graphic EQ, compressor/limiterand much more
- Predefined setups for a quick installation (plug and play)
- MUTE port can be activated by closing the external dry contact, affecting programmed outputs to this effect
Ecler HUB1408 14x8 Digital Zoner With DSP Specifications
Digital Engine:
- Processor: Floating point 32/64bit
Audio Converters:
- Sampling rate: 48kHz
- Resolution: 24 bit, AKM
- Latency: <1.5 ms
- Frequency response: <10Hz ~ 20kHz (+0dB / -0.5dB)
- Dynamic range: AD: 111dB, DA: 115dB
Analogue Audio Input Ports:
- Number of input ports: 2 (IN1-2), Line 4 (IN3-6), Mic/Line 8 (IN7-14), Remote
- Connection type:
- Line: RCA female with Euroblock stack
- Unbalanced Mic/Line: Euroblock (Symmetrical)
- Balanced Remote: RJ45 Connector, Balanced
- Input sensitivity:
- Line: +5 / -15dBV External potentiometer adjustment
- Mic/Line: +0 / -50dBV External potentiometer adjustment
- Remote: 0dBV without adjustment
- Input impedance:
- Line: >13kΩ
- Mic/Line: >24kΩ electronically balanced
- Remote: >24kΩ electronically balanced
- Max input level: 12dBV
- THD + Noise: < 0.005% (1kHz, 1Vrms)
- CMRR: Mic/Line: >60dB (20Hz - 20kHz) Remote: >60dB (20Hz - 20kHz)
- Phantom power: Mic/Line: +48VDC (rear panel switch)
Analogue Audio Output Ports:
- Number of output ports: 8, Line
- Connection type: Euroblock, 3-pin, balanced
- Max output level: 12dbV
- Crosstalk: >90dB, 20Hz - 20kHz
Analogue Monitor Ports:
- Headphones: From Out1 to Out8 selectable, Mini-Jack 3.5mm (>200mW - 200Ω)
Connectivity:
- Ethernet: 1, RJ-45 Ethernet Base-Tx 10/100Mb Auto X-Over CAT5 up to 100m
- Serial port: RS-232 interface with DB9 connector
- Programing and control: Hangar (embedded web application), Ecler pilot (Android/iOS application), TPNET (UDP/RS232)
Remote Control Connections:
- Digital remote controls: Remote bus, RS485
- GPIs: 1, MUTE port
Electrical:
- Secondary power supply: +12VDC, 0,6A max. (short circuit protected)
- AC mains requirement: 100-240 VAC @ 50-60Hz
- AC mains connector: C14 IEC connector
- Power consumption: 20W
Physical:
- Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Operating humidity: <85% HR
- Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Storage humidity: <90% HR
- Installation options: 19-inch rack format (2RU)
- Optional accessories: eMCONTROL1-type physical wall panels, eMPAGE-type paging stations, WPaMIX-T
- Dimensions (W x H x D): 482.6 x 88.0 x 200.0 mm
- Weight: 3.60 kg