Ecler eMPAGE 16 Zone Paging Station for HUB, MIMO88, MIMO88SG, MIMO1212SG

The Ecler eMPAGE 16 Zone Paging Station is a digital paging station (MPAGE16's evolution), compatible with HUB, MIMO88, MIMO88SG and MIMO1212SG digital matrixes. Includes: a gooseneck cardioid microphone (removable); 16 zone-selection keys; ALL, CLEAR and PAGE keys; 2 programmable keys, F1 & F2, for zone-group selection. Text labelling for destination areas by means of programmable electronic ink display.

Ecler eMPAGE 16 Zone Paging Station Features

- 20 mechanical keys with integrated LED status indicator (paging zone selection management)
- 1 mechanical key with adjacent LED indicator (message activation, PAGE key)
- Electronic ink display (shows paging zone names)
- Gooseneck microphone, with standard XLR connector
- Management of up to 16 paging zones
- RJ45 connector for single CAT5 or higher cabling (point-to-point), including power, audio output signal (picked up by the microphone) and digital control bus between the HUB unit and the eMPAGE station
- Connector for backup power supply (optional)
- Two eMPAGE units, with different or equal priority levels, can work simultaneously on the same HUB zoner
- Programming of paging station(s) functionality from the web application embedded in the HUB: enabled paging zones, chime melodies, priorities, programmable keys, etc

Ecler eMPAGE 16 Zone Paging Station Specifications

System:
- Number of output channels: 1 (picked up by the microphone)
- Number of paging zones: 16

Mic Inputs:
- Microphone type: Removable gooseneck condenser microphone (eMCN1)
- Polar pattern: Unidirectional
- Frequency response: 50Hz - 18KHz (-10dB)
- Phantom power: 48VDC, always ON
- Input connection type: XLR female conection type

Screen/Display:
- Resolution: 296x128 Pixels
- Display: Active Matrix Electrophoretic Display
- Touch-panel: No

Monitoring And Control:
- LED indicators: Green LED on All and Clear keys, Bicolor LED on other keys
- Buttons: Paging zone selection keys, PAGE key, F1, F2, All & Clear keys

Connectivity:
- Ethernet: 1 RJ45 connector, cable: Cat-5 or better. Supports PoE
- Programing and control: RS485 and CAN, internally selectable by JUMPER

Electrical:
- Power supply: Optional, 24VDC (min. 80mA) Recommended external power supply: Ecler WP24-PSU
- PoE: Yes
- AC mains requirement: From RJ45 remote input: 12VDC From External Input: 24VDC (With WP24-PSU backup power supply)
- Max power consumption: From RJ45 remote input: 180mA From External Input: 180mA

Physical:
- Type: Paging station
- Installation options: Desktop
- Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Operating humidity: <85% HR
- Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Storage humidity: <90% HR
- Dimensions (WxHxD): 150 x 50 x 180 mm (microphone excluded)
- Weight: 0.9 kg

Ecler eMPAGE 16 Zone Paging Station Supplied With

- Windscreen for Microphone
- Jumper for internal connection
- RJ45 to Euroblock adapter

Please Note: Images are representative only. Final product may vary.