Ecler SAMI-612 6 Channel (Mic/Line) Stereo Rack Mixer

The Ecler SAMI612 6 Channel (mic/line) Stereo Rack Mixer is an installation audio mixer in standard rack format, featuring 6 MIC/LINE Stereo inputs, 1 Stereo MIX input and 1 Stereo MAIN output + 1 Stereo REC output. Each input has a dedicated 3-band tone control, a feature which is fundamental to get a perfect microphone mix in an installation. Input 1 includes talkover (priority) function over the mix bus and additional front panel jack connector. Main output ST/MONO mode switch and MUTE port for external dry contact triggering.

Ecler SAMI-612 6 Channel (Mic/Line) Stereo Rack Mixer Features

- 6 input channels, 2 main outputs 19-inch installation mixer
- Micro sensitivity level can be adjusted on the back panel
- +18V Phantom Power available in all "MIC" inputs
- Direct micro input on front panel, channel 1
- Includes a talkover assigned to "INPUT 1" with internal release time adjustment
- Three-band tone controls for each channel, accessible with a screwdriver
- Vu-meter for the mix signal
- Two internally adjustable output levels
- Recording output
- Direct access to the mixing bus allowing you to connect another mixer and increase the number of inputs
- MUTE remote control input enabled by external dry contact closure for connecting fire detection systems and other safety devices.
- Mono/stereo switch

Ecler SAMI-612 6 Channel (Mic/Line) Stereo Rack Mixer Specifications

Analogue Audio Input Ports:
- Number of input ports: 6, MIC/LINE ( 1 STEREO direct MIC input on front panel) 1, MIX LINE
- Connection type: MIC: 3-pin Euroblock LINE/MIX: RCA
- Input sensitivity: LINE 2-5: 0dB LINE 6: 0dB/-6dB (internally selectable) MIC 1-5 BAL: -35dB
- Input sensitivity adjust: MIC/LINE: ±15dB
- Input impedance: LINE 1-6: 50kΩ MIX LINE: 10kΩ MIC 1-6 BAL: >1kΩ
- CMRR: MIC: >60dB @ 1kHz
- Phantom voltage: +18VDC

Analogue Audio Output Ports:
- Number of output ports: 1 main mix output 1 AUX/REC output
- Connection type: Main: 3-pin Euroblock AUX/REC: RCA
- Output type: 1 STEREO/2 MONO main mix output 1 STEREO AUX/REC
- Nominal output level: OUT: 0dB AUX/REC: 0dB/+6dB (internally selectable)
- Output impedance: OUT: 600Ω AUX/REC: 10kΩ

Signal:
- Frequency response: LINE: 10Hz-50kHz -1dB MIC BAL: 10Hz-30kHz -1dB
- THD + Noise: LINE: <0.005% MIC BAL: <0.04%
- Signal noise ratio: LINE: >100dB MIC BAL: >85dB

Device Control:
- Tone Control: 3-way tone control (For all inputs)
- Tone Frequency Cut: BASS: 100Hz ±15dB MID: 2kHz ±15dB TREBLE: 10kHz ±15dB
- Talkover: TIME: 2 seconds EFFECT: -30dB
- Control Buttons: Power ON, Talkover, LINE/MIC, L+R (output), Gain knob, Volume knob
- Status Indicators: Power ON LED, MUTE LED, Vu-meter LEVEL LEDs

Remote Control Connections:
- GPIs: MUTE control port NO/NC

Electrical:
- Power supply: ±17.5VDC External PSU
- AC mains requirement: 100-240V @ 50-60Hz (External PSU: 17.5VDC)
- AC mains connector: IEC inlet connector
- Power consumption: 14.5VA / 6.8W
- Cooling: Passive

Physical:
- Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Operating humidity: <85% HR
- Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Storage humidity: <90% HR
- Installation options: 19-inch rack format (1RU)
- Dimensions (W x H x D): 482.5 x 44 x 153.7 mm
- Weight: 1.9 kg

Ecler SAMI-612 6 Channel (Mic/Line) Stereo Rack Mixer Supplied With

- 1x Ecler CSAMI612
- ±17.5VDC multi-plug PSU
- EuroBlocks
- Rubber Foot
- Mini Jumpers