Ecler CA120 Micro Amplifier with RS-232 - 2x 60W @ 4 Ohms

The Ecler CA120 Micro Amplifier with RS-232 is a 2 x 60WRMS @ 4 ohm stereo amplifier with a tiny size but amazing remote control features: serial RS-232 port, IR receiver and 0-10 VDC remote port. It's an ideal solution in those audiovisual applications which require integration with external control devices: education classrooms, meeting rooms, multimedia presentations, retail shops, etc.

Ecler CA120 Micro Amplifier with RS-232 Features

- 2 x 60W RMS @ 4Ω amplifier
- Universal external power supply
- AUTO STANDBY function: in the absence of an audio signal the unit automatically goes into STANDBY mode, minimising power consumption
- Lightweight, silent, high-performance amplifier (fan-free convection cooling)
- Suitable for stereo and parallel (mono)
- 1 switchable balanced mic / unbalanced line input, with high quality microphone preamplifier, phantom power supply, noise gate and "talkover" function or priority over the rest of input
- 3 stereo lines (not balanced)
- 2-band independent tone control (Bass, Treble) for the microphone / line 3 and line 1&2 input connection.
- Auxiliary output for liaison with other amplifiers or external audio devices
- Local control by digital rotary knob ("encoder")
- Remote control by infrared remote control
- Remote control by WPmVOL or WPmVOL-SR (0-10 VDC) wall panel
- RS-232 control port, compatible with EclerCOMM software (free) and control protocol CANET
- MUTE port to silence the entire unit by closing external contact

Ecler CA120 Micro Amplifier with RS-232 Specifications

Channels:
- Number of output channels: 2 + 1 AUX
- Output connection type: Euroblock
- Output configuration: 2x 60WRMS @ 4Ω stereo amplifier
- Number of input channels: 3
- Input connection type: MIC: balanced Euroblock or jack LINE: unbalanced minijack or double RCA
- Input configuration: 1 MIC/LINE input 2 LINE inputs

Output Power - All Channels Driven @ 1%Thd:
- Max output power:
  - 8Ω: STEREO 2x 34W
  - 4Ω: STEREO 2x 56W

Signal:
- Input sensitivity: LINE: -6dBV (0dBV internally selectable) MIC (BAL): -20 to -50dBV
- Input impedance: LINE: >8kΩ MIC: >1kΩ
- Frequency response: 15Hz - 30kHz (-3dB)
- THD + Noise: SPKR OUT: < 0.15% AUX OUT: < 0.02%
- SNR: LINE: >85dB MIC: >65dB
- Crosstalk: >65dB @ 1kHz
- CMRR: MICRO (BAL): >65dB @ 1kHz

Electrical:
- Power supply: Universal
- AC mains requirement: 100-240V @ 50-60Hz + External PSU 24VDC
- AC mains connector: DC24V power connector

Power Consumption:
- Power Consumption (1/3 POWER, @ 4Ω all channels driven): pink noise, 58VA / 52W
- Power Consumption (1/8 POWER, @ 4Ω all channels driven): pink noise, 33VA / 24W
- Power Consumption (STBY/SLEEP): <2.5W

Technologies:
- Energy saving: Auto stand by function
- Cooling: Convection (fanless)

Protections:
- AC protection: No
- DC protection: No
- VHF protection: No
- Short-circuit protection: No
- Clip limiter: No
- Long term limiter: No
- Thermal protection: No

Remote Control Connections:
- GPIs: Volume & Input/preset selection (0-10V based)
- External MUTE: Power free contact (infrared remote)

Settings:
- Attenuators: Front panel knob
- Tone control: 2-band independent tone control (Bass, Treble) for the microphone / line 3 and line 1&2 input connection.
- Output settings: STEREO-MONO outputs
- Auto standby function: Rear panel micro switch
- Auto standby time: 120 seconds

Connectivity:
- Serial port: RS-232
- Programing and control: EclerCOMM software or CA-NET protocol

Monitoring:
- Signal Present: SP LED (Green)
- Cliping: CLIP LED (Red)
- Standby: STBY LED (Orange)

Physical:
- Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Operating humidity: <85% HR
- Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Storage humidity: <90% HR
- Installation options: Wall or under a surface (table, shelf, cupboard, etc.)
- Dimensions (W x H x D): 160 x 48 x 210 x mm
- Weight: 0.95 kg

Ecler CA120 Micro Amplifier with RS-232 Supplied With

- 1x Ecler CCA120C
- REVO-IR remote control