Ecler CA120HZ Micro Amplifier with RS-232 - 96W @ 70V / 100V Line

The Ecler CA120HZ Micro Amplifier with RS-232 is the high impedance version of the CA120, delivering 96W @ 70/100V line level, a technology which is especially suitable for long loudspeaker wire runs and/or an amount of loudspeaker units far beyond the 2 or 4 units typically connected to a low impedance amplifier. Under its tiny size, it features an amazing set of remote control features: serial RS-232 port, IR receiver and 0-10 VDC remote port. CA120HZ is an ideal solution in those audiovisual applications which require integration with external control devices: education classrooms, meeting rooms, multimedia presentations, retail shops, etc.

Ecler CA120HZ Micro Amplifier with RS-232 Features

- 1 x 96W RMS @ 70 / 100V amplifier
- Universal external power supply
- AUTO STANDBY function: in the absence of an audio signal the unit automatically goes into STANDBY mode, minimising power consumption
- Lightweight, silent, high-performance amplifier (fan-free convection cooling)
- 1 switchable balanced mic / unbalanced line input, with high quality microphone preamplifier, phantom power supply, noise gate and "talkover" function or priority over the rest of input
- 2 stereo lines (unbalanced)
- 2-band independent tone control (Bass, Treble) for the microphone / line 3 and line 1&2 input connection.
- Auxiliary output for liaison with other amplifiers or external audio devices
- Local control by digital rotary knob ("encoder")
- Remote control by infrared remote control
- Remote control by WPaVOL or WPaVOL-SR (0-10 VDC) wall panel
- RS-232 control port, compatible with EclerCOMM software (free) and control protocol CA-NET
- MUTE port to silence the entire unit by closing external contact

Ecler CA120HZ Micro Amplifier with RS-232 Specifications

Channels:
- Number of output channels: 1 + 1 AUX
- Output connection type: Euroblock
- Output configuration: 1 x 96W RMS @ 70/100V
- Number of input channels: 3
- Input connection type: MIC: balanced Euroblock or jack LINE: unbalanced minijack or double RCA
- Input configuration: 1 MIC/LINE input 2 LINE inputs

Output Power - All Channels Driven @ 1%Thd:
- Max output power @ 100V: 96W @ 100Ω

Signal:
- Input sensitivity: LINE: 0dBV (-6dBV internally selectable) MIC: -20 to -50dBV
- Input impedance: LINE: >8kΩ MIC: >1kΩ
- Frequency response: 50Hz - 30kHz (-3dB)
- THD + Noise: SPKR OUT: <0.09% AUX OUT: < 0.02%
- SNR: LINE: >70dB MIC (BAL): >50dB
- Crosstalk: >65dB @ 1kHz
- CMRR: MIC (BAL): >65dB @ 1kHz

Electrical:
- Power supply: Universal
- AC mains requirement: 100-240V @ 50-60Hz + External PSU 24VDC (using Meanwell GS60A24-P1J)
- AC mains connector: DC24V power connector

Power Consumption:
- Power Consumption (1/3 POWER, @ 4Ω all channels driven): pink noise, 58VA / 52W
- Power Consumption (1/8 POWER, @ 4Ω all channels driven): pink noise, 33VA / 24W
- Power Consumption (STBY/SLEEP): <2.5W

Technologies:
- Energy saving: Auto stand by function
- Cooling: Convection (fanless)

Protections:
- AC protection: No
- DC protection: No
- VHF protection: No
- Short-circuit protection: No
- Clip limiter: No
- Long term limiter: No
- Thermal protection: No

Remote Control Connections:
- GPIs: Volume & Input/preset selection (0-10V. based)
- External MUTE: Power free contact (infrared remote)

Settings:
- Attenuators: Front panel knob
- Tone control: 2-band independent tone control (Bass, Treble) for the microphone / line 3 and line 1&2 input connection.
- Filters: 50Hz - 70Hz High Pass Filter
- Output settings: Mono only outputs (L+R summed in case of active stereo input)
- Auto standby function: Rear panel micro switch
- Auto standby time: 120 seconds

Connectivity:
- Serial port: RS-232
- Programing and control: EclerCOMM software or CA-NET protocol

Monitoring:
- Signal Present: SP LED (Green)
- Cliping: CLIP LED (Red)
- Standby: STBY LED (Orange)

Physical:
- Operating temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Operating humidity: <85% HR
- Storage temperature: Min: -10°C ; 14°F Max: 40°C ; 104°F
- Storage humidity: <90% HR
- Installation options: Wall or under a surface (table, shelf, cupboard, etc.)
- Dimensions (W x H x D): 160 x 48 x 325 mm
- Weight: 2.92 kg

Ecler CA120HZ Micro Amplifier with RS-232 Supplied With

- 1x Ecler CCA120HZC
- REVO-IR remote control