CYP SDV-F1H-RX SDVoE Full 4K 10G AV over IP Fiber Based Small Form Factor Receiver

The CYP SDVF1HRX SDVoE Full 4K 10G AV over IP Fiber Based Small Form Factor Receiver delivers 4K@60 4:4:4 signals over Fibre.

The SDV F1H RX 10G SDVoE Fiber receiver 10G SDVoE receiver is designed for high-quality, IP routable, AV extension up to 4K@60 4:4:4 with minimum latency. SDV-F1H-RX 10G SDVoE Fiber receiver uses interchangeable, field replaceable, SFP+ modules to allow 10G SDVoE signals to be received distances of up to 120km (Maximum transmission distance depends on the SFP+ modules used). Advanced HDMI content such as HDR (High Dynamic Range), 10- bit colour and multi-channel HD Bitstream audio can be transmitted in passthrough mode.

The small and compact size design enhances the flexibility of installation. When combined with the optional IP Master Controller, the SDV-CS8, the functionality of the transmitter expands exponentially. Multiple transmitters and receivers may be combined with one or more 10-Gigabit fiber Ethernet switches and the units can be used together to form a distributed video matrix, a multiviewer system, or a video wall system adding to their flexibility in large event installations. Advanced control such as firmware update can also be performed conveniently through the optional controller hardware.

CYP SDV-F1H-RX Features

- HDMI 2.0 and DVI 2.0 compatible
- HDCP 2.2 and HDCP 1.x compliant
- Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI (IEEE 802.3ae) compatible SFP+ fiber modules
- 4K60 Extension up to 300m as standard
- 4K60 Extension up to 120km by replacing supplied SFP+ module(maximum distance depends on the SFP+ module and type of fiber used)
- IP switchable with minimum latency (requires optional control centre or control software)
- Ultra-light compression, lossless for most content
- Supports pass-through of 10/12-bit HDR sources (Point-to-Point and Bypass modes only)
- Supports pass-through of audio formats including LPCM (up to 8 channels), Bitstream and HD Bitstream from HDMI or DP sources
- Signal transmission interfaces with 10-Gigabit Ethernet switches via XFI (IEEE 802.3ae) compatible SFP+ fiber module

CYP SDV-F1H-RX Specifications

Inputs:
- 1x SFP + [1x SDVoE LC/PC-LC/PC Duplex MM OM3]

Outputs:
- 1x HDMI [1x HDMI Uncompressed AV and Data]

- PSU: 5V/2.6A
- Dimensions: 60mm [W] x 25mm [H] x 95mm [D]
- Net Weight: 180g