CYP CR-CS2 IP to Relay, IR & RS232 Controller

The CYP CRCS2 is a simple Control System for a wide variety of connected devices.

It stores 16 user-defined macro events that users can activate through the Web GUI or Telnet. External trigger connections can also activate eight of these macros. User defined macros can send commands to remote devices via Ethernet, IR (x4), relay trigger (x4), or RS-232/422/485 (x1) allowing for the control of a wide array of devices at the push of a button.

With the CR CS2 an integrated IR code learning function is also available, allowing the user to store and re-transmit the IR codes sent by nearly any standard IR remote. Comprehensive user control interfaces are available including Web GUI, telnet and console (RS-232 in). The CRCS2 IP Controller supports Power over Ethernet (PoE), allowing you to power it directly from a standard PoE network switch without an external power adapter for simple installation.

CYP CR-CS2 Features

- 16 user defined macro events stored within the device
- 8 trigger inputs linked directly to 8 user macros allowing for instant control activation
- 4 relay trigger outputs to control devices such as projector screens, lighting, blinds etc.
- 4 IR outputs to control devices such as sources and displays
- Integrated IR code learning feature
- Multiple control interfaces including Web GUI, telnet and RS-232
- Simple configuration of macros, triggers and relay settings via the Web GUI
- PoE (Power over Ethernet) support - no PSU required

CYP CR-CS2 Specifications

Inputs:
- 1x RJ45 [1x (PoE) IP Control]
- 1x USB Type A [1x Service Port Propriety Data]
- 1x Phoenix (5 pin) [1x RS-232/422/485 Com Port]
- 1x Phoenix (10 pin) [1x Trigger In (8)]
- 1x 3.5mm Stereo mini-jack [1x IR capture - Infra Red Receiver]

Outputs:
- 4x Phoenix (2 pin) [4x Contact Closure Relay Outputs]

- POE PSU: PoE
- PSU: 5V/2.6A
- Dimensions: 128mm [W] x 25mm [H] x 108mm [D]
- Net Weight: 400g