Antari DNG-100 Smoke/Fog Cooler

The Antari DNG-100 Smoke/Fog Cooler converts normal smoke from smoke machine into a floor-hugging cloud which is almost virtually similar to the dry ice effect. This is achieved by cooling the temperature of the fog to the point where it falls to the ground.
The DNG-100 is easy to operate as there are no external controls on the machine. Simply plug the unit in and place the fog conducting hose from the output of any fog machine to the input of the DNG-100.
The unit is fully operational upon being plugged in. Note that the volume of fog produced is controlled by the fog machine that the DNG-100 is attached to.

Antari DNG-100 Smoke/Fog Cooler Features

- Creates dry ice fog effect
- Uses normal fog fluid
- Works with any fog machine

Antari DNG-100 Smoke/Fog Cooler Specifications

- Control Mode: Manual On / Off
- Output Direction: Forward
- Output: Dependant on attached smoke machine
- Maximum Ambient Temperature: 40 °C

Electrical:
- Power Supply: 100-240 VAC 50-60 Hz
- Start current: 21A @ 240V
- Rated current: 3.2A @ 240V
- Power Consumption: 750 W
- Power Connector in: Schuko Plug

Physical:
- Dimensions (W x H x D): 607 x 437 x 780 mm
- Weight: 72 kg