JBL Control 50S/T 8-Inch Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System, 150W @ 8 Ohms or 70V/100V Line - White

JBL Control 50S/T 8-Inch Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System, 150W @ 8 Ohms or 70V/100V Line - White

Ref: JP3666

JBL Control 50S/T 8-Inch Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System, 150W @ 8 Ohms or 70V/100V Line - White

The JBL Control 50S/T 8-Inch Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.


JBL Control 50S/T 8-Inch Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System Features

- Full bandwidth 32 Hz - 20 kHz high fidelity sound
- Selectable 70V/100V for distributed lines, or low impedance
- Versatility for either two or four satellite speakers per system


JBL Control 50S/T 8-Inch Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System Specifications

- Frequency Range (-10dB): 32 Hz - 200 Hz
- Frequency Response (±3 dB): 50 Hz - 150 Hz
- Power Capacity:
  - 300 Watts Continuous Program Power (2 hrs)
  - 150 Watts Continuous Pink Noise (2 hrs)
  - 200 Watts Continuous Program Power (100 hrs)
  - 100 Watts Continuous Pink Noise (100 hrs)
- Sensitivity: 95 dB (near corner), 89 dB (center of wall)
- Maximum SPL (1m): 115 dB average, 121 dB peak (near corner)109 dB average, 115 dB peak (center of wall)
- Impedance: 8 ohms (in bypass/thru mode)
- Transformer Taps: 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
- Drivers: 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
- Input Connectors: Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
- Enclosure: Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
- Dimensions (H x W x D): Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in)Wall Bracket: 15 mm (0.6 in) deep
- Mounting Hardware: 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
- Net Weight (each): 9.0 kg (20 lbs)
- Shipping Weight: 10.2 kg (23 lbs)
- Grille: Zinc-plated steel


JBL Control 50S/T 8-Inch Surface-Mount Subwoofer for Subwoofer-Satellite Loudspeaker System Supplied With

- JBL Control 50S/T Subwoofer
- Wall bracket (both speaker and wall parts)
- 4x M6 screws to attach to speaker
- 6x 2-pin locking connectors
- terminal cover
- M6 screw for safety lanyard attachment



For Product Information & Pricing please Click Here Contact us for more images if needed