JBL VRX932LAP-1 12-Inch 2-Way Active Line Array Speaker, 875W @ 8 Ohms - Black

The JBL VRX932LAP-1 12-Inch 2-Way Active Line Array Speaker is a powered, lightweight, compact 12-inch two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.

JBL VRX932LAP-1 12-Inch 2-Way Active Line Array Speaker Features

- Built-in JBL Drivepack DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality
- JBL's exclusive neodymium magned Differential Drive woofer for high-power capacity and light-weight
- VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design
- Constant Curvature waveguide for unprecedented array coherence
- Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility
- Array Configuration Selector permits "array shading"

JBL VRX932LAP-1 12-Inch 2-Way Active Line Array Speaker Specifications

- Power Rating: 1750 Watts Peak875 Watts Continuous
- Frequency Range (-10dB): 57 Hz - 20 kHz
- Frequency Response: 75 Hz - 20 kHz (±3db)
- Maximum SPL (1m): 136 dB SPL
- Coverage Pattern: 100 x 15 nominal
- DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance): LF: 750 Watts, HF: 125 Watts
- DPC-2 Output Section: LF: Dual-Bridged Technology, Class D
- Inputs: XLR with loop through
- LF Driver: 1 x JBL 2262FF 305 mm (12 in) neodymium magnet
- HF Driver: 3 x JBL 2408J, 38 mm (1.5 in)
- User Controls: Input Attenuator (0-16 dB)
- Signal Processings: DSP based, resident in Input Module
- AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60 Hz
- AC Input Connector: Neutrik PowerCon (NAC 3MPA)
- AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
- AC Current Requirements: 6A per system at 120V, 3A per system at 240V
- Enclosure: 25/15 mm, 11-ply birch plywood
- Suspension / Mounting: Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
- Finish: Black DuraFlex finish
- Grille: Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam
- Optional Accessories: VRX-AF: Suspension array frame
- Outputs: 1 x XLR
- System Type: Constant Curvature 12" Two-Way Powered Line Array System
- Nominal Impedance: NA - amplification is integrated
- Dimensions (H x W x D): 349 mm x 597 mm x 444 mm(13.75 in x 23.5 in x 17.5 in)
- Net Weight (each): 24 kg (52 lb)