FBT Mitus 118FSCA 18-inch Cardioid-Arrayable Flyable Passive Subwoofer, 1200W - Rear Version

The FBT Mitus 118FSCA 18-inch Cardioid-Arrayable Flyable Passive Subwoofer is an 18 inch, rear-paneled amplified subwoofer with 1200W RMS to 139dB SPL. It is equipped with a protective grille on the front panel and the amplifier module on the back of the loudspeaker. The FSCA model is designed to be paired with 2 FSA models.

FBT Mitus 118FSCA 18-inch Cardioid-Arrayable Flyable Passive Subwoofer Features

- Compact Hybrid band pass cardioid-arrayable subwoofer. Hybrid configuration permit to obtain extension and speed of vented with high SPL and acoustic filtering of band pass
- Suspension hardware fully compatible with MITUS206La allowing the enclosure to be suspended front (FSA model) or rear-firing (FSCA model) for easy cardioid configurations
- Very large area laminar-flow port to ensure no power compression and very low port turbulence
- For cardioid configurations with one SUB rear-firing and two sub front-firing, more than 15db SPL rejection can be obtained behind the array
- 18 inch (460mm) custom B&C neodymium magnet high excursion woofer with 3.5 inch (88mm) voice coil
- Frequency Response from 33Hz to 1Hz
- Class D amplifier delivering 1200WRMS
- Switch mode power supply
- DSP with 8 presets, cardioid and with infra configurations, delay
- Control panel with XLR input and link, volume, presets, delay, phase 0° - 180°, ground-lift
- ⅝ inch (15mm) birch plywood enclosure, scratch resistant black paint
- Low frequency extension cabinet for the MITUS 206LA line array for flying or ground stacked configurations.
- Very low profile for a 18 inch size woofer

FBT Mitus 118FSCA 18-inch Cardioid-Arrayable Flyable Passive Subwoofer Specifications

- Configuration: 1 Hybrid Bandpass way
- Built-in amplifier (LF / HF):
  - RMS: 1200W
  - Peak: 2400W
- Frequency response: 33Hz - 100Hz -6dB
- Low Frequency woofer: 1x18 - 3.5 coil neodymium inch
- Maximum SPL cont/peak: 135/139 half space dB
- Dispersion: omnidirectional HxV
- Input impedance: 22 kΩ
- Crossover Frequency: preset dependant KHz
- AC Power requirements: 640 VA
- Input connector: XLR with loop
- Power cord: 5 m
- Net Dimension (W x H x D): 576 x 538 x 756 mm
- Net Weight: 45 kg
- Transport Dimension (W x H x D): 700 x 690 x 800 mm
- Transport Weight: 55 Kg