FBT Ventis 115M 2-Way 15-Inch Passive Monitor, 500W @ 8 Ohms

The FBT Ventis 115M 2-Way 15-Inch Passive Monitor is a dedicated floor monitor for use on small to medium-sized stages This passive speaker features a a 15 inch coaxial custom woofer with 2.5 inch voice coil and 1 inch exit throat B&C with 1.7 inch voice coil. The rear panel provides two NL4 Neutrik speakon connectors. Recommended amplifier of 500W @ 8ohm will deliver 129dB SPL. Optional brackets for installation are available.

FBT Ventis 115M 2-Way 15-Inch Passive Monitor Features

- Built-in passive crossover with soft-trip protection for the LF woofer and HF driver
- Speakon NL-4 IN and LINK OUT connectors

FBT Ventis 115M 2-Way 15-Inch Passive Monitor Specifications

- Configuration: 2 way
- Recommended amplifier: 500 W RMS
- Long Term power: 250 W
- Short Term Power: 1000 W
- Nominal impedance: 8 Ω
- Frequency response: 55Hz - 18KHz -6dB
- Low Frequency woofer: 15 inch with 2.5 inch voice coil
- High frequency driver: 1 inch with 1.7 inch voice coil
- Sensitivity (@1W/1m): 99 dB
- Maximum SPL cont/peak: 126/130 dB
- Dispersion: 90° HxV
- Crossover Frequency: 1.4 KHz
- Recommended HP filter: 50Hz - 12-24db/oct
- Recommended external filter: FBT DLM26
- Input connector: 2x Speakon
- Net Dimension (WxHxD): 632 x 354 x 516 mm
- Net Weight: 20.3 kg
- Transport Dimension (WxHxD): 732 x 454 x 616 mm
- Transport Weight: 24.8 kg