Le Maitre GForce 3 Smoke Machine - DMX

The Le Maitre GForce 3 DMX smoke machine is the most powerful unit in the GForce range with smoke output at 51000cbm/hr. It also has inbuilt DMX and settings can be stored for instant recall on power-up.
With smoke output ranges up to 51,000 cbm/hr, the GForce 3 provides a realistic, reduced visibility environment, producing huge amounts of dense white, non-toxic smoke, ideal for emergency simulation sessions.
The GForce 3 can be used with Le Maitre’s own Industrial Smoke Fluid. This water-based, non-toxic fluid is perfectly engineered for BA training. A combination of mono/polyglycol, glycerol and de-mineralized water, produces a dense white smoke with consistent particle size and a lengthy hang-time, sustainable even at high temperatures.
The GForce 3 uses a low pressure system to produce the safest smoke. The higher the pressure internally in the heat exchanger, the higher temperature the fluid is heated to. This can lead to molecular charring causing free radicals to be formed. This in turn can lead to all sorts of unpleasant molecules to be formed. Whereas with a low pressure system such as that used in the Le Maitre’s machines, the temperature is much easier to control and the units are able to produce smoke that has not been burned at high temperatures.
As with all Le Maitre Smoke Generators, the GForce 3 uses a patented “Layered Block System” called Genesis. Along with this they use a short heating pipe of just 1m which allow the smoke machines to be powered by much smaller wattage heaters than competitive models, but still give immense power. Furthermore, Le Maitre’s heater blocks can be dismantled and serviced or replaced, while competitive a cast blocks cannot, becoming scrap once they reach the end of their life.

Le Maitre GForce 3 Smoke Machine Features

- Maximum smoke output @ 51000 cbm/hr
- Fluid consumption 1.5cc/s (cont); 8cc/s (burst) (60min/5L bottle)
- Warm up time 6 - 8 mins
- Operating Time: Continuous – automatic level adjustment.
- Automatic & Continual Flow Control: An extremely high accuracy thermal monitoring system, combined with the micro-processor control and a highly stable patented heat exchanger, allows a self-management system to automatically adjust the flow rate for maximum conditions at any temperature
- Unique pump control for ultimate fog management and pump protection
- Genesis easy change block system
- Compact design
- Twin heaters for powerful continuous output
- Unique pulse/phase pump control
- Dual Processor Circuitry with digital multi feature control
- Optional space saving 5 Litre bottle holder
- Remote controller
- Mechanical fail-safe

Le Maitre GForce 3 Smoke Machine Specifications

- Power Source Requirements 230VAC 2200W 50Hz, 110VAC 1700W 60Hz
- External Fusing 12AT ceramic / 20AT ceramic
- Internal Fusing 500mA PCB transformer
- Fluid Capacity Detachable 5 Litres Bottle Carrier
- Control Manual or DMX
- DMX 512 3 channels: Output, Smoke On delay, Aux Fan
- Typical Smoke Output 1100 m3 /min.
- 250 m³ /min final continual output
- Dimensions (W x H x D): 290 x 200 x 410 mm
- Weight: 12 kg