Le Maitre 2874 Curly Tube Heater For Le Maitre Neutron XS Hazer
Ref: JP58367
Le Maitre 2874 Curly Tube Heater For Le Maitre Neutron XS Hazer
- The machine is placed on a suitable work surface
- The machine has been allowed to cool for at least 10 minutes
- The use of correct tools for panel removal and tube replacement
- The ability to be able to confirm suitability of use after the replacement has been made
- This tube is sited underneath the fan inlet side panel
- Removing this side panel will allow easy access and replacement should it ever be required
- Two M8 nuts secure the ends of the tube and a quick connector completes the temperature sensor connection
- The nuts secure the tube both physically and electrically
- It is important that they should not be over tightened whilst at the same time, tight enough to provide a good electrical connection
- Push on silicon tubing supplying the fluid and air drive is easily removed from the input end
- It is best to use 'nyties' since this will add security to the fluid and air supply connections
- After tube replacement, and having checked that all parts are as they should be, the tube should be run through a 'bedding in' period, where any tendency to occasionally output very fine fluid particles (if any), will clear
The Le Maitre 2874 Curly Tube Heater For Le Maitre Neutron XS Hazer is a replacement curly tube heater that fits the Le Maitre Neutron XS Hazer. Should tube replacement be required, then all the necessary safety precautions should be made before doing so:
- The machine is not connected to the mains supply- The machine is placed on a suitable work surface
- The machine has been allowed to cool for at least 10 minutes
- The use of correct tools for panel removal and tube replacement
- The ability to be able to confirm suitability of use after the replacement has been made
- This tube is sited underneath the fan inlet side panel
- Removing this side panel will allow easy access and replacement should it ever be required
- Two M8 nuts secure the ends of the tube and a quick connector completes the temperature sensor connection
- The nuts secure the tube both physically and electrically
- It is important that they should not be over tightened whilst at the same time, tight enough to provide a good electrical connection
- Push on silicon tubing supplying the fluid and air drive is easily removed from the input end
- It is best to use 'nyties' since this will add security to the fluid and air supply connections
- After tube replacement, and having checked that all parts are as they should be, the tube should be run through a 'bedding in' period, where any tendency to occasionally output very fine fluid particles (if any), will clear
For Product Information & Pricing please Click Here Contact us for more images if needed